Thread:

Cp Gullwing

Greg I Understand You Have The Molds For The Cp Gullwing? If This Is True How Much Am I Looking At To Get A 19 Ft Gullwing Layed Up For . I Dont Need Trailer I Just Need The Hull . Thanks

We have access to the 19 Gullwing molds. This 19 is not the CP 19 but is just like the CP 19. These molds were aquired by Mike and myself and were used to aquire the 19 TPR molds with the agreement that we would allow access to the 19 TPR and we would be allowed to build boats out of the mold and sell them as the So Cal 19 Gullwing. For further info give Mike or myself a call any time.

Originally Posted by greg shoemaker

We have access to the 19 Gullwing molds. This 19 is not the CP 19 but is just like the CP 19. These molds were aquired by Mike and myself and were used to aquire the 19 TPR molds with the agreement that we would allow access to the 19 TPR and we would be allowed to build boats out of the mold and sell them as the So Cal 19 Gullwing. For further info give Mike or myself a call any time.

Who splashed your Gullwing mold? Wht type of modifications were made? I would also be interested in one. Thanks.

The original 19 gullwing molds were built by Jim Youngblood.So there is no telling where these molds came from I know they were in San Diego at Neils Perf, for atleast 10 yrs. The bottom has been straightened right in the mold and any imperfectons have been fixed. Really turned out a really straight part. Dave Batista was responsible for these mods and if you go to the spam section you can see the finished boat under So Cal 19.

Neil bought the molds from Jim Dominick and I bought them from Neil a couple of years ago. I had the deck mold recaged and some keel and misc. touch up work done. The only boat that I built out of the mold turned out nice considering the mold dates back to the 70's. The only differences that I see between the CP and the SoCal mold are in the deck and they are slight.

Good luck with your project!

I Want The Deepest Hull I Can Get So You Feel Like You Are More In The Boat Rather Then On Top.

Originally Posted by hallettss

I Want The Deepest Hull I Can Get So You Feel Like You Are More In The Boat Rather Then On Top.

I own a 19 gullwing and a 19 tunnel. I feel like I am sitting on a piece of plywood in the tunnel. The gullwing is as deep as any of the v bottoms. if you make it to the regatta you can see tunnels and v bottoms together in person.

Originally Posted by Mike D

I am sitting on a piece of plywood in the tunnel.

surprised that passes tech at the races buddy.

I use wood to rig my boats too. 2 buh 4's are cheeper than aloominhum out here.

HOTBURN

Originally Posted by unblown fool jet

surprised that passes tech at the races buddy.

I use wood to rig my boats too. 2 buh 4's are cheeper than aloominhum out here.

HOTBURN

Nice to finally meet you FOOL, you are everything I expected, nice to see the whole familly was with you