PDA

View Full Version : CP wiring harness hookup ?'s....


konajet74
07-25-2008, 11:50 AM
Hi Brad,
I purchased a complete wiring harness from you guys & my
setup is a little different. Your harness is setup for a coil &
starter w/ solenoid attached. I have a HEI & a old school
starter which mounts on top of the bell housing w/ one batt
cable attach point & a remote solenoid. Do you have another
wiring diagram or can you point me in the right direction please?

Thank You!

CP Performance
07-25-2008, 01:48 PM
Hi Brad,
I purchased a complete wiring harness from you guys & my
setup is a little different. Your harness is setup for a coil &
starter w/ solenoid attached. I have a HEI & a old school
starter which mounts on top of the bell housing w/ one batt
cable attach point & a remote solenoid. Do you have another
wiring diagram or can you point me in the right direction please?

Thank You!

I would recommend using your HEI distributor instructions, we do not have any other wiring diagrams. Also feel free to call in to our tech department they may be able to help you further if you get stuck.

Thanks,
Brad