So Thanks to Tom @ Jet Boat Performance

wolfie · 09-07-2009, 04:19 PM

My boat is back on the water and running great!!!! The kid is enjoying it and the wife stopped divorce proceedings!!!!

jetboatperformance · 09-07-2009, 08:08 PM

Thank you Dave for the business and the patience , But the credit for your jet goes to son Josh, he works very hard at what he does and takes Great pride in that work !

BTW your "old" WR was welded to your impeller (pics to follow)

IMPATIENT 1 · 09-08-2009, 06:21 AM

Quote:

Originally Posted by jetboatperformance

Thank you Dave for the business and the patience , But the credit for your jet goes to son Josh, he works very hard at what he does and takes Great pride in that work !

BTW your "old" WR was welded to your impeller (pics to follow)

that he does

the impellor he "laid" hands for me sho bites good and spins to exactly where i wanted

i can leave the hole like i have an inducer, but it ain't got that or even a stuffer

wolfie · 09-08-2009, 08:21 AM

Then props to Josh and everyone at JBP!!!

Tahiti Boss21 · 09-08-2009, 04:00 PM

wolfie what'd you have done? Very nice cruiser!

wolfie · 09-08-2009, 06:54 PM

Quote:

Originally Posted by Tahiti Boss21

wolfie what'd you have done? Very nice cruiser!

Besides the advice and moral support, he and Josh built me a fantastic pump and set me up with a new drive line & PTO. He also hooked me up with a nice throttle linkage.
I used to just bother my cousin all the time when I needed help. I'm sure he got tired of that. No wonder he tried to get me to call Tom a couple years ago.

(thanks again for the help you gave me, Shawn).

Tom also has good taste in boats!!!!!!

jetboatperformance · 09-08-2009, 06:59 PM

Look Dave they're (the boats) damn near Twins

I was searching for a Schiada cruiser when this came along , Made 1 call to Greg (Shoe) and bought it in a heartbeat Love My Eliminator 20'

IMPATIENT 1 · 09-08-2009, 07:04 PM

you've got to many damn boats tom, you need to give me a couple

wolfie · 09-08-2009, 07:16 PM

I love mine as well. My wife even likes it when it runs!!! It's been running great since I put in the new pump. Just a few little things to make it good.
Had the interior redone this past spring and the guys screwed it up royally. Got most of the money back. As soon as I can afford it I'm going to have it redone back to original, pearl white with the maroon, orange and yellow. No more dealing with amateurs. That's why I blew my last jet and ended up with a mess of an interior.

jetboatperformance · 09-08-2009, 07:22 PM

Quote:

Originally Posted by IMPATIENT 1

you've got to many damn boats tom, you need to give me a couple

You probably thought I was Bs'n about my carport yesterday

huh Tommy !

09-07-2009, 04:19 PM	#1
wolfie Senior Member Join Date: Dec 2007 Location: Draper, Utah Posts: 2,197	So Thanks to Tom @ Jet Boat Performance My boat is back on the water and running great!!!! The kid is enjoying it and the wife stopped divorce proceedings!!!! __________________ "Somewhere in Kenya there is a village missing it's idiot" "I'd rather be a conservative nut job than a liberal with no nuts and no job!!!" _______________________________________ _______________________________________

09-07-2009, 08:08 PM	#2
jetboatperformance JetBoat Marine Parts&Svc Join Date: Dec 2007 Location: Atascadero Calif Posts: 3,364	Thank you Dave for the business and the patience , But the credit for your jet goes to son Josh, he works very hard at what he does and takes Great pride in that work ! BTW your "old" WR was welded to your impeller (pics to follow) __________________ -------------------------- www.jetboatperformance.com 805)-466-4719 jetboatinfo@sbcglobal.net

09-08-2009, 08:21 AM	#4
wolfie Senior Member Join Date: Dec 2007 Location: Draper, Utah Posts: 2,197	Then props to Josh and everyone at JBP!!! __________________ "Somewhere in Kenya there is a village missing it's idiot" "I'd rather be a conservative nut job than a liberal with no nuts and no job!!!" _______________________________________ _______________________________________

09-08-2009, 04:00 PM	#5
Tahiti Boss21 "Try it Now!" Join Date: Jun 2008 Location: Yucaipa, California Posts: 2,696	wolfie what'd you have done? Very nice cruiser! __________________ '77 Tahiti 21' Mini Day"Boss 21" TRY IT NOW!

09-08-2009, 06:59 PM	#7
jetboatperformance JetBoat Marine Parts&Svc Join Date: Dec 2007 Location: Atascadero Calif Posts: 3,364	Look Dave they're (the boats) damn near Twins I was searching for a Schiada cruiser when this came along , Made 1 call to Greg (Shoe) and bought it in a heartbeat Love My Eliminator 20' __________________ -------------------------- www.jetboatperformance.com 805)-466-4719 jetboatinfo@sbcglobal.net

09-08-2009, 07:04 PM	#8
IMPATIENT 1 mo balls than $cents$ Join Date: Dec 2007 Location: hugo,okla Posts: 8,330	you've got to many damn boats tom, you need to give me a couple __________________ Don't let folks tell you it can't be done "history doesn't repeat itself, but it does rhyme" mark twain

09-08-2009, 07:16 PM	#9
wolfie Senior Member Join Date: Dec 2007 Location: Draper, Utah Posts: 2,197	I love mine as well. My wife even likes it when it runs!!! It's been running great since I put in the new pump. Just a few little things to make it good. Had the interior redone this past spring and the guys screwed it up royally. Got most of the money back. As soon as I can afford it I'm going to have it redone back to original, pearl white with the maroon, orange and yellow. No more dealing with amateurs. That's why I blew my last jet and ended up with a mess of an interior. __________________ "Somewhere in Kenya there is a village missing it's idiot" "I'd rather be a conservative nut job than a liberal with no nuts and no job!!!" _______________________________________ _______________________________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode