Endurashine Coatings- Who Does It?

**396_Ways_To_Spit** · 03-12-2009, 08:49 PM

I have been seeing that new Edelbrock Endurashine stuff floating around and it looks badass!!! Does anyone know who does it? I have alot of parts that I would love to get coated with that stuff. Any info would be greatly appreciated

Thanks Spitter

here is a link about it......

http://www.edelbrock.com/automotive_...ne/intro.shtml

**396_Ways_To_Spit** · 03-12-2009, 08:51 PM

**396_Ways_To_Spit** · 03-12-2009, 08:52 PM

Endura-Shine Finish
Available on many Popular products like-
Intake Manifolds
Carburetors
Water Pumps
Valve Covers
Air Cleaners
• Bright Silver Chrome finish with powder-coat durability• 3-Step Vacuum Metering Process; base coat, aluminum coat, and a clear top coat to enhance abrasion and chemical resistance• A bright, durable, maintenance-free polished aluminum look•

Now you can get show-quality looks and a great performing manifold, water pump and accessories with this ultra-modern finish. What is EnduraShine™? It's an amazing finish that has the brilliance of chrome or a well-polished piece, but without the maintenance or the high price tag. This revolutionary new coating won't fade or oxidize and cleans up easily with soap and water.

The secret to the success of EnduraShine™ is its three-step coating process. First a base coat is applied for adhesion and smoothing properties. A second coat of metal is then applied in a high-tech vacuum chamber for a complete and consistent coat that is actually thinner than a human hair. The third and final coating includes a clear powder coat for the ultimate protection and durability. This all adds up to great looks, exceptional value and long-term durability.

this was copied from thier website....

**RCB19** · 03-12-2009, 08:54 PM

Embee Performance can handle all your needs. 714-546-6907

**hallettss** · 03-12-2009, 08:56 PM

I found out that no one does it. It is a only done by Edelbrock products . I called every powder coater i could find and talked to dozens of people at SEMA . Only Edelbrock does it it is there own system and they wont let anyone use it . I heard it from Mr Edelbrock himself at SEMA.

**396_Ways_To_Spit** · 03-12-2009, 11:55 PM

Originally Posted by RCB19

Embee Performance can handle all your needs. 714-546-6907

How close can they get?

**396_Ways_To_Spit** · 03-12-2009, 11:56 PM

Originally Posted by hallettss

I found out that no one does it. It is a only done by Edelbrock products . I called every powder coater i could find and talked to dozens of people at SEMA . Only Edelbrock does it it is there own system and they wont let anyone use it . I heard it from Mr Edelbrock himself at SEMA.

I wonder if they if they will coat my parts if I send em over to them....

Hey Bubba, call me tomorrow. Ill be in the area and would luv to see my lil man "Baby Bubba"

**cave** · 03-13-2009, 05:24 AM

Note the valve covers and intake ,

I wish I had sent the blower to Embee. Check em out Mike.

**hallettss** · 03-15-2009, 02:47 PM

those pieces look awsome but its not endurashine . but they look very good i must say

**Outlaw** · 03-15-2009, 06:55 PM

Originally Posted by cave

Note the valve covers and intake ,

I wish I had sent the blower to Embee. Check em out Mike.

Those are polished aluminum and sealed with ceramic clear

This was powdercoated by embee
closest thing they had to chrome

**tiki** · 03-16-2009, 07:13 AM

we looked into the process a couple of years ago. the equipment was very very expensive. dollar for dollar i would go with chrome. because the final finish is a clear powder coat - you run the risk of damage from fuel etc.. the founding company of the process is PERMASTAR. good luck

**HawaiianJet** · 03-16-2009, 08:53 AM

It sounds very similar to the process used to metalize Mylar for emergency blankets and satellite/NASA stuff.

**PT PERF** · 03-16-2009, 07:40 PM

Concept powder coating in rancho cucamonga ca does it for edelbrock but from what i understand they wont do it for the general public due to edelbrock coming up with the formula and paying to patent the material but i bet they can come up with something pretty close

**hallettss** · 03-16-2009, 08:44 PM

Originally Posted by PT PERF

Concept powder coating in rancho cucamonga ca does it for edelbrock but from what i understand they wont do it for the general public due to edelbrock coming up with the formula and paying to patent the material but i bet they can come up with something pretty close

I think I said that .

Thread:
Endurashine Coatings- Who Does It?

LinkBack

Thread Tools

Display