the bottom is the same as a 21 daytona:happy: i have a couple buddys with the 21 daytona and i checked the bottoms with a tape :))THumbsUp:))THumbsUp...
The grease zerk fitting is on the side of the housing near the thrust bearing at the front of the pump. Depending on how old the bowl is you may have...
The 17-4 shafts are magnetic and the standard Berkeley shafts are not magnetic. There is also a stock dominator shaft that is magnetic, but not made...
Polished offenhouser dual four barrel tunnel ram with direct port nitrous plumbed on the under side of mnifold. The spacing on the top will allow you...