BBC tunnel ram and carbs and roller cam
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 14 of 28

Thread:
BBC tunnel ram and carbs and roller cam

  1. #1
    Razor Wire Militia 髯岙喢殮作's Avatar
    Join Date
    Dec 2007
    Location
    Lake Havasu, AZ
    Posts
    741

    Default BBC tunnel ram and carbs and roller cam

    new victor TR-2 tunnel (rectangle port)ram with 2 600 CFM double pumper blower carbs. has SS hard lines, sideways mounting plates, throttle linkage, custom aluminum feed/bypass log with bypass regulator only1-1 1/2 hrs on this setup. $1000.00 + shipping





    custom Chris Straub ground roller cam 265 intake 272 exhaust @ .50, Morell pressure fed solid roller lifters, Crain gold rocker arms 1.7 x 8 and 1.8 x 8 ... package deal with with only 1-1 1/2 hrs on this setup. lifters are $600 new cam is $500 new rocker arms are $450 new ( will not separate) pushed my little pump gas 496 to 710 HP @ 6000 / 660 TQ @ 5200

    all for only $700
    Last edited by 髯岙喢殮作; 05-29-2008 at 08:58 PM.

  2. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  3. #2
    Senior Member Futs's Avatar
    Join Date
    Dec 2007
    Location
    Orange CA, Big River
    Posts
    4,396

    Default

    Crane rocker arms, Not lifters. 1.7 x 8 and 1.8 x 8 right???

  4. #3
    B.A.M aka "Black Azz Mike 396_Ways_To_Spit's Avatar
    Join Date
    Feb 2008
    Location
    Mesa,Az "Da Eastsiiiiiiiiiiiiiiiiide"
    Posts
    2,926

    Default

    I sent you a pm on the cam kit. Will you throw in the pushrods?? If not thats ok

    Why are you splitting this up??????
    G H E T T O F O E L I F E
    Quote Originally Posted by cave View Post
    They bout shit themselves when yelled in Messican, "No brakes no brakes."
    I showed them all the sticker on the side that reads "Driver Ricky Bobby" They just looked at me and nodded yes yes
    Quote Originally Posted by Kyle View Post
    Some peeps just build it 1 part, 1 week, 1 paycheck at a time

  5. #4
    Razor Wire Militia 髯岙喢殮作's Avatar
    Join Date
    Dec 2007
    Location
    Lake Havasu, AZ
    Posts
    741

    Default

    Quote Originally Posted by 396_Ways_To_Spit View Post
    I sent you a pm on the cam kit. Will you throw in the pushrods?? If not thats ok

    Why are you splitting this up??????

    ya if they will work they are yours as I have 2 sets anyways ..


    sellin cause I am going to put this engine in my warlock.stock bravo 1 drive wont handle the power and the cam wont let me run water at idel ...

  6. #5
    Razor Wire Militia 髯岙喢殮作's Avatar
    Join Date
    Dec 2007
    Location
    Lake Havasu, AZ
    Posts
    741

    Default

    Quote Originally Posted by Futs View Post
    Crane rocker arms, Not lifters. 1.7 x 8 and 1.8 x 8 right???
    yayaya i fucked up posting this .. I fixed it thanks Bro..

  7. #6
    Razor Wire Militia 髯岙喢殮作's Avatar
    Join Date
    Dec 2007
    Location
    Lake Havasu, AZ
    Posts
    741

    Default

    any questions feel free to call me anytime 928-208-0291

    Shawn

  8. #7
    Senior Member Futs's Avatar
    Join Date
    Dec 2007
    Location
    Orange CA, Big River
    Posts
    4,396

    Default

    This hasnt sold yet? 50 cents on the dollar. Good top end package here.

  9. #8
    Razor Wire Militia 髯岙喢殮作's Avatar
    Join Date
    Dec 2007
    Location
    Lake Havasu, AZ
    Posts
    741

    Default

    Quote Originally Posted by Futs View Post
    This hasnt sold yet? 50 cents on the dollar. Good top end package here.
    ok I will make it a whole top end package $4000.00 for the heads and whats listed above AFR 325 cc

  10. #9
    Senior Member holorinhal's Avatar
    Join Date
    Jan 2008
    Location
    Las Vegas, Nv
    Posts
    1,474

    Default

    You have a P.M

    I'm not here for a long time, I'm just here for a good time!
    If your not on the edge.......your taking up too much room......Drive it like you stole it!

    73 KONA Restoration http://www.performanceboats.com//showthread.php?t=10678
    '81 Spectra 20 Facelift http://www.performanceboats.com/user...-facelift.html

    18' Advantage http://www.performanceboats.com/jet-...k-project.html

  11. #10
    Senior Member ap67et10's Avatar
    Join Date
    Mar 2008
    Location
    Chico, Ca
    Posts
    1,494

    Default

    would you sell the tunnel ram by itself?

    AP

  12. #11
    Senior Member Futs's Avatar
    Join Date
    Dec 2007
    Location
    Orange CA, Big River
    Posts
    4,396

    Default

    Quote Originally Posted by ap67et10 View Post
    would you sell the tunnel ram by itself?

    AP
    Negative, Package deal. Sorry.

  13. #12
    Razor Wire Militia 髯岙喢殮作's Avatar
    Join Date
    Dec 2007
    Location
    Lake Havasu, AZ
    Posts
    741

    Default

    Quote Originally Posted by ap67et10 View Post
    would you sell the tunnel ram by itself?

    AP
    Quote Originally Posted by Futs View Post
    Negative, Package deal. Sorry.

    what he said

  14. #13
    Senior Member XClutchboy725's Avatar
    Join Date
    Apr 2008
    Location
    Alta Loma, CA
    Posts
    436

    Default

    Quote Originally Posted by ap67et10 View Post
    would you sell the tunnel ram by itself?

    AP
    Hey Southwind boys! Sell him the tunnel ram and carbs and sell me the heads and cam!

    That cam will be ok with wet headers off- idle, right?

    Jeff

  15. #14
    Razor Wire Militia 髯岙喢殮作's Avatar
    Join Date
    Dec 2007
    Location
    Lake Havasu, AZ
    Posts
    741

    Default

    Quote Originally Posted by XClutchboy725 View Post
    Hey Southwind boys! Sell him the tunnel ram and carbs and sell me the heads and cam!

    That cam will be ok with wet headers off- idle, right?

    Jeff
    Jeff it will be OK with water above 2500. I will sell you the cam package with the heads no problem.. lots of looky loos and tire kickers some very interested but money talks and bullshit walks but just remember with this whole package you will have a 700 HP pump gas engine dyno tested and tuned just add your 10.2:1 short block even have a few extras that I will not be be needing like the valve covers and a complete MSD 6al system for more money of course

+ Reply to Thread
Page 1 of 2 12 LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.
If you do not want to register, fill this field only and the name will be used as user name for your post.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Tags for this Thread

Digg This Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91