Dr j's Performance pump gas 567 BBC!
+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 14 of 22

Thread:
Dr j's Performance pump gas 567 BBC!

  1. #1
    Senior Member
    Join Date
    Aug 2008
    Posts
    105

    Default Dr j's Performance pump gas 557 BBC! LOWER PRICE!

    Dr j's Performance pump gas 557 BBC! """""MUST SELL"""""" THIS IS A FRESH OFF THE DYNO PUMP GAS MONSTER! DR J'S PERFORMANCE 557 BBC 741 HP @ 6000 RPM AN 731 TORQUE @ 4600 RPM DYNO SHEETS IN HAND. MOTOR WILL SPIN 7000 RPM IF NEED BE. DR J'S BRYCE MULVEY IS A TOP NOTCH CYLINDER HEAD/INTAKE MANIFOLD PORTER WHO DEMANDS NOTHING SHORT OF PERFECTION. BRYCE IS A VERY WELL RESPECTED BUILDER/TUNER BY MANY SUCH AS JIM WILKES MARINE, CHEVY PERFORMANCE, ENGINE MASTERS, CAR CRAFT, AN HOT ROAD MAGAZINES AN OTHER EDITORS. THIS IS A PLUG AN PLAY MOTOR PACKAGE MINUS EXHAUST. -MOTOR SPECS: -1) 557 BBC 741hp @ 6000 rpm AN 731ftlbs @ 4600 rpm @ 30 DEGREES TIMING -2) 9.75 TO 1 COMPRESSION -3) 4.565 BORE X 4.25 STROKE -4) LS1 FIRING ORDER -5) HYD ROLLER 248 254 @ .050 112 LSA .630 LIFT WITH 1.7 TITANIUM ROCKERS -6) CP BULLET PISTONS FLAT TOP -7) COMP CAM -8) EAGLE CRANK AND H BEAM RODS -9) MANLEY HYD ROLLER VALVE SPRINGS, INTAKE VALVES, AN EXHAUST VALVES -10) BBC CLEVITE MAIN BEARINGS & ROD BEARINGS -11) DR J'S PORTED WORLD MERLIN OVAL PORT HEADS AN PORTED AN POLISHED DART SINGLE PLANE INTAKE -12) HOLLEY 850 DOUBLE PUMPER -13) DOOLEY ENTERPRISES 10QT PAN -14) BILLET MSD IGN WITH #2 BLASTER COIL AN #6 MARINE BOX -15) HARDIN MARINE OIL/PS COOLER -16) STARTER AN ALT -17) IMCO WATER PUMP -18) POLISHED PULLIES NEW BELTS/ POLISHED GT PERFORMANCE AIR/FIRE ARRESTOR AIR CLEANER -19) SS #12 LINES AN FITTINGS -20) PREWIRED PLUG AN PLAY WIRE HARNESS THIS IS A MUST SELL MAKE ME AN OFFER I CAN'T REFUSE I MIGHT JUST SAY YES WILL SHIP ON MY OWN DIME. CALL ANYTIME JP 310-707-3546 * * * I NEED THIS MOTOR GONE! I WILL CONSIDER ALL OFFERS. $17,000 OBO
    Last edited by Walshmotorsports; 09-07-2012 at 01:22 PM. Reason: correcting a typo....

  2. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  3. #2
    Senior Member
    Join Date
    Aug 2008
    Posts
    105

    Default

    A friendly bump!

  4. #3
    Dos XX Speed Freak's Avatar
    Join Date
    May 2008
    Location
    Orange County
    Posts
    395

    Default

    As a former owner of Dr. J's power. I can say they make awesome motors. A full dressed motor at this price??? Someone is going to get one hell of a deal... Just wish I was in the market for a new motor...

  5. #4
    Senior Member bc18's Avatar
    Join Date
    Jul 2008
    Posts
    863

    Default

    Bryce did one hell of a job on my cylinder heads.

  6. #5
    Senior Member Bubbletop409's Avatar
    Join Date
    Jan 2008
    Location
    Castro Valley, Ca.
    Posts
    1,016

    Default

    Just FYI a 4.565 bore by a 4.25 stroke does not work out to 567CI.
    Larry

    62 Bel-Air 409

    260 Eagle XP HP500EFI

    2002 Corvette M-6 Coupe

    79 Cole TR-2 Sunset Racecraft 565 (RIP Tracy)

    Remember in November

    Well done USN Seal Team 6

  7. #6
    Senior Member
    Join Date
    Aug 2008
    Posts
    105

    Default

    Quote Originally Posted by Bubbletop409 View Post
    Just FYI a 4.565 bore by a 4.25 stroke does not work out to 567CI.
    Well Larry your right. I made some calls and my motor is a 557. I was sure it was but on dyno sheet it said 567. Just a type-o. Hey but since you here going over this ad with a fine tooth comb I know your really doing it because you have interest in buying this motor! So what is a good time for you to come over and take a look with cash in hand and make me an offer?

  8. #7
    Senior Member Futs's Avatar
    Join Date
    Dec 2007
    Location
    Orange CA, Big River
    Posts
    4,425

    Default

    kinda over priced for what it is in my opinion, but thats just me....good luck with the sale.....

  9. #8
    Senior Member
    Join Date
    Aug 2008
    Posts
    105

    Default

    Over priced.....Some people will pay thousands for a diamond.......then there are those that will cheap out and get a cubic zicornia.

  10. #9
    Senior Member sleekvino's Avatar
    Join Date
    Dec 2007
    Posts
    278

    Default

    Quote Originally Posted by Walshmotorsports View Post
    Over priced.....Some people will pay thousands for a diamond.......then there are those that will cheap out and get a cubic zicornia.
    they both still shine!!!
    PORNO RACING INC WHERE ITS "HARD" TO WIN

  11. #10
    The member 1bdhondo's Avatar
    Join Date
    Jan 2008
    Location
    ca
    Posts
    2,870

    Default

    Quote Originally Posted by Futs View Post
    kinda over priced for what it is in my opinion, but thats just me....good luck with the sale.....
    I KNOW, You are stacked with championships in the class that I started in 21 years ago. ME is known as the starter class and you my friend, are KING of that sandbox!!

  12. #11
    Senior Member WMorton's Avatar
    Join Date
    Apr 2009
    Location
    San Diego, CA
    Posts
    1,552

    Default

    I'll give you $4k for it, that's a fair price and I have cash in hand. I can pick this engine up tomorrow at 1pm or Friday at 3pm.

    Im kidding, but you are too with that price right? If you look around you can buy twice the engine for half that price.

  13. #12
    Senior Member Bubbletop409's Avatar
    Join Date
    Jan 2008
    Location
    Castro Valley, Ca.
    Posts
    1,016

    Default

    Quote Originally Posted by Walshmotorsports View Post
    Well Larry your right. I made some calls and my motor is a 557. I was sure it was but on dyno sheet it said 567. Just a type-o. Hey but since you here going over this ad with a fine tooth comb I know your really doing it because you have interest in buying this motor! So what is a good time for you to come over and take a look with cash in hand and make me an offer?
    Well thanks for the offer, just wanted to clairify, but I have a great 565 currently in my Cole that I couldn't be happier with, good luck with your sale.
    Larry

    62 Bel-Air 409

    260 Eagle XP HP500EFI

    2002 Corvette M-6 Coupe

    79 Cole TR-2 Sunset Racecraft 565 (RIP Tracy)

    Remember in November

    Well done USN Seal Team 6

  14. #13
    Senior Member Futs's Avatar
    Join Date
    Dec 2007
    Location
    Orange CA, Big River
    Posts
    4,425

    Default

    Quote Originally Posted by Walshmotorsports View Post
    Over priced.....Some people will pay thousands for a diamond.......then there are those that will cheap out and get a cubic zicornia.
    Well, I will stay away from your fake diamond for that kind of money, and buy the real thing for what your asking.......

    540ci oldsmobile for sale! Built by mike miller

    Again, good luck with the sale........
    Last edited by Futs; 08-15-2012 at 10:09 PM.

  15. #14
    Senior Member
    Join Date
    Aug 2008
    Posts
    105

    Default

    Really. Your trying to compare a NOS drag boat motor to a pump gas poker run type motor thats more for like a 26 foot DCB or some 29 foot cat? If I ever want drag boat stuff I will first stop at my buddy Jeff Martins house or go to Gordon at Pfaff. I also see your a Blythe Big River person. Nice place I towed up many flatties to lost lake for years, had a totally different motor set up than what I posted for sale in this ad. This is a decent cubic inch deal that will run on 91 pump gas. will that olds No? Can you hang that deal at nearly full throttle for miles across Havasu? No. Not because Millers motor is a POS nor do I think its over priced I dont care and I'm not going to keep wasting a mans time if I am not interested in buying his deal. Do I think your comparison is totally stupid? Yes. Also maybe you should realize that when having a motor built by a professional that prides himself in building the best product he can and the years of testing and dyno time have a price tag as well. This is not my first experience With Bryce. The guy will spent many hours not just porting my heads yet on the flow bench getting each port balanced with 1 and other as best as he can. Even if its not a big dollar cemetrical port drag boat deal. The power per dollar I believe is totally fair for the craftsmanship that he put into this motor as well as other builders products.
    Im sure other top builders feel there knowledge of combinations, cam choices and all the little tricks they have learned over the years have some value in pricing their motor work as well. Thats why its priced lower than the dollar amount I have into it.
    Last you don't have to wish me luck on the sale. For the market in bigger boats it's a decent price. Instead why dont you just leave my ad alone and let me deal with people that may want to purchase it.

+ Reply to Thread
Page 1 of 2 12 LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.
If you do not want to register, fill this field only and the name will be used as user name for your post.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Tags for this Thread

Digg This Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91