*** Super Sale!! Blow-out!! ***
Hey all you Boaters out there! TCM has a Ton of Misc. Parts/Pieces that are cluttering our shelves and NEED TO GO to make room for New Poducts! We will keep updating often so keep your eyes peeled. Also, if there is something you do not yet see listed, CALL US! We have it all! Ask For Parts/Sales. PH- 661.295.7000
PH- 661.295.7000, FX- 661.295.7007, Info@TeagueCustomMarine.com
Check out our Website for product listings and 24/7 Ordering
www.TeagueCustomMarine.com
DENTED NEW 14 Qt. GEN V BBC Oil Pan with dual kick outs. Fits most single and twin engine applications. Only 1 @ this Price! Is brand new, and when installed you will never see the defect!
1@ $500.00 Ret-$792.00
Product Spec's • Race proven windage tray prevents foaming and crankshaft splash, maintaining consistent oil pressure. • TIG welded and especially designed for marine use • Clearance for low mount starters and sea pumps • Large oil capacity. Available in 10 and 14 qt. pans and 12 qt. ”CAT” pans. • All Offshore pans notched, clears up to 4.5 inch stroke with steel rods. • High volume competition oil pick-up is welded with an added support bracket to prevent breakage. • Flexible dipstick allows easy access for universal fitment. • Clears most standard front engine mounts. (Mercruiser included) • Designed to fit BBC, Mark IV, GEN V-VI, World Products and Dart engine blocks • Reduces operating temperature and engine failures due to increased oil capacity. • Black PC coated inside and out resists staining and corrosion
throw in one of your new Drives and I'll take the pan...
v drives parts ?
" my carbon footprint is gonna kick your green ass"
Originally Posted by 396_Ways_To_Spit
[/SIGPIC]He has been allowing me to park my equipment in his backyard for a few years now...
Autometer Gauge Blow-out!
TCM has a few AUTOMETER GAUGES that need to go! There is just NOT room on the shelf for them anymore! These are all we have, and are offering them to you below Cost!
WHITE GAUGES- WHITE FACE W/ SUPER WHITE RIM-
4) 3 3/8"- 7000 RPM TACH W/ HOUR METER (P/N: 200890) $94.00 EA
2) 3 3/8"- 8000 RPM TACH (P/N: 200799) $78.00 EA
1) 3 3/8"- 100 MPH, GPS SPEEDO HEAD (P/N: 200836) $97.00 EA
4) 3 3/8"- 120 MPH, GPS SPEEDO HEAD (P/N: 200837) $97.00 EA
1) 2 1/16"- OIL PSI, 0-100 PSI (P/N: 200758) $26.00 EA
1) 2 1/16"- WATER TEMP, 100-250 DEG. (P/N: 200762) $26.00 EA
2) 2 1/16"- FUEL LEVEL (P/N: 200760) $26.00 EA
2) 2 1/16"- VOLT METER, 8-18 VOLTS (P/N: 200756) $26.00 EA
5) 2 1/16"- OIL TEMP, 140-340 DEG. (P/N: 200764) $26.00 EA
1) 2 5/8"- TRIM, MERCURY (P/N: 200767) $31.00 EA
PLATINUM GAUGES- PLATINUM FACE W/ SUPER PLATINUM RIM-
1) 3 3/8"- 6000 RPM TACH (P/N: 200752-33) $77.00 EA
1) 3 3/8"- 8000 RPM TACH (P/N: 200779-33) $106.00 EA
1) 2 5/8"- TRIM, MERCURY (P/N: 200767-33) $31.00 EA
These are our entire stock of AutoMeter Gauges! When they are gone they are gone! We can order YOU New AUTOMETER Gauges, but we do not Stock them (& not at this pricing)! So act fast to get this once in a lifetime deal! If you find a better advertised price for these particular gauges, we will beat it!
To order, please contact our parts Dept! Thanks!
PH- 661.295.7000
FX- 661.295.7007
Sales@TeagueCustomMarine.com
For all Parts check out our Website @ www.TeagueCustomMarine.com
"WE HAVE EVERYTHING BUT THE WATER"
Hey Lucky-
What V-Drive parts are you looking for? We have 3 Whole Shelves that have your name all over it! From Props, Rudders, Seals, turnbuckles, steering, bearings, etc.... and so much more we stock it! If we don't have it on the shelf, we can get it for the best price (if it still avalible)!
To order, please contact our parts Dept! Thanks!
PH- 661.295.7000
FX- 661.295.7007
Sales@TeagueCustomMarine.com
For all Parts check out our Website @ www.TeagueCustomMarine.com
"WE HAVE EVERYTHING BUT THE WATER"
any ford bb parts
Turn left
TCM- is cleaning house and has run across (3) 71 series SuperChillers that need to find new home/motor! These Chillers are brand new but have a small blemish on each of them. TCM is offering these (3) only for $1,275.00 ea! Sold Complete w/ Housing, Core, End Caps (1/2" or 3/4"), Gaskets, and Hardware (studs, nuts).
6-71 through 14-71 SuperChiller Intercooler.
Description:
If you’re looking for a cost effective method of increasing your supercharged engine’s output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.
Ask For Sales! PH- 661.295.7000, FX- 661.295.70007, Sales@TeagueCustomMarine.com
Check out our full parts catalog @ www.TeagueCustomMarine.com
"WE HAVE EVERYTHING BUT THE WATER!"
please pm me with a price on the intercooler.......also a set of aluminum studs / nuts and a fuel rail if you have them also................. thanksTCM- is cleaning house and has run across (3) 71 series SuperChillers that need to find new home/motor! These Chillers are brand new but have a small blemish on each of them. TCM is offering these (3) only for $1,275.00 ea! Sold Complete w/ Housing, Core, End Caps (1/2" or 3/4"), Gaskets, and Hardware (studs, nuts).
6-71 through 14-71 SuperChiller Intercooler.
Description:
If you’re looking for a cost effective method of increasing your supercharged engine’s output and improving reliability, install a SuperChiller Intercooler. Bolt-on 75 to 150 horsepower. The SuperChiller Intercooler dramatically reduces the air temperature of the intake charge, thereby increasing air density to the combustion chamber. A cooler, denser air/fuel mixture takes up less space inside each cylinder, allowing the mixture to provide an increased intake charge without the risk of detonation.
Ask For Sales! PH- 661.295.7000, FX- 661.295.70007, Sales@TeagueCustomMarine.com
Check out our full parts catalog @ www.TeagueCustomMarine.com
"WE HAVE EVERYTHING BUT THE WATER!"
Last edited by The Violater; 10-26-2008 at 07:49 PM. Reason: add
/ The Few The Proud TheBlown
Have any Jomar stud girdles for AFR heads BBC on sale?
#55
Revolution 4- RH rotaion, 14 5/8" x 21 Pitch, 4 Blade.
P/N: 48-857028-21
Prop in a New Condition! Not a Nick or a scratch!
$350.00 w/ new Solid 1" Hub (1 @ this price)
MUST MENTION THIS ADD FOR SUPER SALE PRICE!
Check online for other propellers in stock @
www.TEAGUECUSTOMMARINE.com
PH- 661.295.7000, FX- 661.295.7007
Sales@TEAGUECUSTOMMARINE.com
"WE HAVE EVERYTHING BUT THE WATER!"
Mercury Outboard Trim Pump
MERCURY- OUTBOARD TRIM PUMP ASSEMBLY!!
P/N: 92975A32
BRANDNEW AND NEVER INSTALLED!!
RETAIL- $773.10
SPECIAL SALE PRICE- $449.97
(MUST CALL FOR SPECIAL)
Valve Covers Blow-out!
Looking for a AFFORDABLE set of Polished, Billet Valve covers? How about this... (1) pair of NEW Teague- Polished Valve Covers (never installed). We were cleaning house after recieving a new batch and found these puppies (older logo) and have no room for them on the shelf.
1 set @ $125.00 **Must call for sale Set/Price!!**
(breathers, gaskets and hardware sold seperately)
TEAGUE CUSTOM MARINE
661.295.7000
sales@teaguecustommarine.com
Remember, order online 24/7 @ www.TEAGUECUSTOMMARINE.com!
2x S.S. CROSSOVER KITS! ($100 off)
Alright, we have 2 crossover kits that need to disappear! Kits include- S.S. 1.25" push-on down left cross over w/ 1/2" bypass bung, S.S. 1" push-on std. flange thermostat housings w/ 1/2" bypass bung (clocked @ 3/9 o'clock), Black Ano aluminum fittings / adapters w/ cloth braided hoses, crossover/therm housing gaskets, and all S.S. hardware! Once these are gone, they are gone! -Eric
2 @ $236.46 ($100.00 off retail)!
Must call and mention add!
"We Have Everything But The Water!"
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Digg This Thread