So a couple of years ago my brother, kettle 1 decides he wants a boat for himself, so I found him a pretty nice 94 cp that had a decent motor and some pump work. Boat worked great for a couple of years and would do about 84 mph at our local Tuesday night deal. During regular maintenance last fall,discovered that a valve lock was about to pull thru the retainer, so, we decided its a good time for some aluminum heads, cam, but wait, since we are here we might as well do this, that ,etc. You have heard this story before right!!
Now he has 604 cubes of fun, our engine builder just had to happen have a new dart block, jesel belt drive, 55 mm roller cam, and jesel .904 lifters for sale that another customer bought new but changed directions so it was purchased for song! Filling it out was callies pro mangnum crank and rods, afr 385 heads (with extra work done) , jesel rockers and marcella sheet metal intake with two gary williams dominators, weaver bros extnal oil pump, stephs pan, moroso vacum pump set up. Am in the process of mounting front motor accessories and will be on the dyno when finished, will post results later.
Since the motor was getting beefed up, Jack at mpd was called to go thru the boat and make more upgrades, set back, low pro intake, jetaway, go thru entire pump again, with new imp, inducer, custom loader grate and remount the engine. Jack was nice enough to bring the boat to the burley race for delivery!
Next, new gauges, wiring, upholstery and carpet, so yes, a new set of heads and we are here now, HA!! will post new pick as they come, thanks