never had this issue - Reply to Topic

Reply to Thread

Post a reply to the thread: never had this issue

Your Message

 

Send Trackbacks to (Separate multiple URLs with spaces)

You may choose an icon for your message from this list

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Please select your insurance company (Optional)

Log-in

Additional Options

  • Will turn www.example.com into [URL]http://www.example.com[/URL].

Topic Review (Newest First)

  • 08-29-2011, 09:35 PM
    hihosilver
    will do
  • 08-29-2011, 05:10 PM
    Shaun
    Still check your pressure....
  • 08-29-2011, 01:55 PM
    hihosilver
    well found the problem gasket surface on the intake( used) I will be sanding for a bit, everything else is good
  • 08-27-2011, 06:52 PM
    hihosilver
    boat is stored inside, but will blow the lines out
  • 08-27-2011, 06:44 PM
    Alter Ego
    Where do you store the boat? outside? if so a "dirt dobber" as we call em down south will/can get deep in the line and block it up, and water will not get the clog out on its own most of the time.
  • 08-27-2011, 04:48 PM
    hihosilver
    no thermo, but line out the back flows better than it used to, headers a little less, I will put a new gasket and set up a pressure gauge, the only things changed were the heads and intake, thermo housing and lines are the same
  • 08-27-2011, 03:15 PM
    ol guy
    Quote Originally Posted by hihosilver View Post
    took grandkids out for ride, new motor running good about a couples miles before we get to the rampwater pressure pushed the gasket out of the thermosate housing, got the kids with hot water but no burns, I guess I need to check water pressure, also noticed that when you slow down temp goes way up then comes right back down and it never did that before it come up slowly to about 1/2 and stay till I speed up
    First off! Glad the kids didn't get burned. second does it have a thermostat. If not you have a exit limiter somewhere holding the water in to long which is proven by the fact you need to get on it to cool it down. My 02. M
  • 08-27-2011, 01:28 PM
    justsquirtin
    would be your water line out of the block to transom-
  • 08-27-2011, 10:29 AM
    PowerAddict
    Not to jack the thread, but that sounds similar to the problem I was having. Would the dump lines be the water injection to the headers (OTT headers), or would it be the bypass...or both?
  • 08-27-2011, 10:05 AM
    Cas
    sounds kind of like there's a blockage in the dump lines somewhere not allowing the water to flow through the system.
  • 08-27-2011, 08:17 AM
    hihosilver

    never had this issue

    took grandkids out for ride, new motor running good about a couples miles before we get to the rampwater pressure pushed the gasket out of the thermosate housing, got the kids with hot water but no burns, I guess I need to check water pressure, also noticed that when you slow down temp goes way up then comes right back down and it never did that before it come up slowly to about 1/2 and stay till I speed up

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95