mounting nitrous bottle - Reply to Topic

Reply to Thread

Post a reply to the thread: mounting nitrous bottle

Your Message

 

Send Trackbacks to (Separate multiple URLs with spaces)

You may choose an icon for your message from this list

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Please select your insurance company (Optional)

Log-in

Additional Options

  • Will turn www.example.com into [URL]http://www.example.com[/URL].

Topic Review (Newest First)

  • 04-20-2012, 09:57 PM
    lupo1904
    Thats the only place i go, ill be there mamorial weekend, keep an eye out for the brown trout
  • 04-20-2012, 09:23 PM
    FARMER JOHN
    thats why it works good the old fuel tank with the insulation inside of it and then the bottle inside of that helps keep the bottle temp down in the summer and the clamp is on the end of the section of the fuel tank (only about 18" long) its real easy to change bottles.

    If your down at fishers this summer i will look forward to meeting you
  • 04-20-2012, 08:51 PM
    lupo1904
    Good deal farmer john, i have heard alot about you from the bostick and seen alot of your machines on the forums but still have not meet you. Thanks for the input. What is the purpose of a bottle warmer? Doesnt juice like to be about 70 degrees? I have seen guys keep there bottles in the water at the river which isnt a bad idea
  • 04-20-2012, 08:06 PM
    FARMER JOHN
    something that you need to think about, When was the last time your boat sat level in the water? and on the launch the bow rises and then exceleration moves the liquid to the back, I run mine at a slight angle and under the seats so as to keep it out of the sun, and the mount is an old fuel tank that i cut up and put a 1/4" foam insulation inside it then i just slide the bottle in it and clamp it down.
  • 04-20-2012, 06:09 PM
    lupo1904
    Got it handeled 2" rise
  • 04-20-2012, 02:04 PM
    JeffT
    Nitrous Outlet » Online Catalog » Nitrous Accessories » Bottle Accessories

    If you look at the basic stainless steel bottle brackets on this page, the front mount has a riser that might be around 2". If you can get any angle at all where you're trying to mount them it will probably be fine.
  • 04-20-2012, 02:03 PM
    cordog009
    Quote Originally Posted by lupo1904 View Post
    cordogg, that what i was thinking,so thats how i made my brakets but the front of the bottle is to high to fit between my seat and the side of the boat.Looks like im gunna have to run some angle from stringer to stringer just to mount the bottle to, or cut the bracket down but i dont know how much of an angle is needed for the tube in the bottle to be able to pick up the juice.
    They don't need to have too much angle, 15-20* is usually ideal. The tube should be fairly close to the bottom of the bottle anyway.
  • 04-20-2012, 01:48 PM
    lupo1904
    cordogg, that what i was thinking,so thats how i made my brakets but the front of the bottle is to high to fit between my seat and the side of the boat.Looks like im gunna have to run some angle from stringer to stringer just to mount the bottle to, or cut the bracket down but i dont know how much of an angle is needed for the tube in the bottle to be able to pick up the juice.
  • 04-20-2012, 01:42 PM
    cordog009
    On a standard bottle you want the front tilted up with the decal on top, the siphon tube is bent at the bottom towards the floor.
  • 04-20-2012, 01:29 PM
    lupo1904
    Rpm
  • 04-20-2012, 12:48 PM
    JD Dearden
    You guys using a progressive system for your boats?
  • 04-20-2012, 12:28 PM
    lupo1904
    I never seen a nos bottle monted standing straight up, but is it ok to mount it level?
  • 04-20-2012, 11:07 AM
    JeffT
    lupo, your thinking is correct, the bottle should be mounted on an angle unless it's been modifed to be mounted standing up.
  • 04-20-2012, 09:11 AM
    lupo1904
    I can mount it to the seat pad but i thought the bottle had to be tilted up so i made my bracets that way, it wont fit in there at a angle but will fit in there level
This thread has more than 14 replies. Click here to review the whole thread.

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95