Pump expert in Bullhead/Havasu area - Reply to Topic

Reply to Thread

Post a reply to the thread: Pump expert in Bullhead/Havasu area

Your Message

 

Send Trackbacks to (Separate multiple URLs with spaces)

You may choose an icon for your message from this list

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Please select your insurance company (Optional)

Log-in

Additional Options

  • Will turn www.example.com into [URL]http://www.example.com[/URL].

Topic Review (Newest First)

  • 08-25-2009, 09:56 PM
    Squirtin Thunder
    I take calls 24/7. I can work around your schedule so we can check out the boat/engine and see what is going on and how we can fix any problems. Give me a call anytime.

    BTW-Thank you everyone for the recommendation.

    Thank you
    Jim
    JR Performance Motorsports
    928-770-4394
  • 08-25-2009, 08:08 PM
    cjaj70
    The number should be stamped on one of the front flanges were the bolt holes are.
  • 08-25-2009, 08:01 PM
    Cas
    Quote Originally Posted by Leeminator View Post
    Thanks, this will help me!
    you're welcome! Also, here's the link to Edelbrock's all you need to know about their carburetor pages-
    http://www.edelbrock.com/automotive_...ers_manual.pdf
  • 08-25-2009, 06:09 PM
    קmᮆÚ
    here try this for Jim's number

    his website
  • 08-25-2009, 06:06 PM
    Leeminator
    Quote Originally Posted by Cas View Post
    here's the Edelbrock carb numbers along with what cfm they are-

    1403 - 500 cfm
    1404 - 500
    1405 - 600
    1406 - 600
    1407 - 750
    1409 - 600 Marine
    1410 - 750 Marine
    1411 - 750
    1412 - 800
    1413 - 800
    Thanks, this will help me!
  • 08-25-2009, 05:54 PM
    Cas
    here's the Edelbrock carb numbers along with what cfm they are-

    1403 - 500 cfm
    1404 - 500
    1405 - 600
    1406 - 600
    1407 - 750
    1409 - 600 Marine
    1410 - 750 Marine
    1411 - 750
    1412 - 800
    1413 - 800
  • 08-25-2009, 05:23 PM
    MAXXJETT
    Quote Originally Posted by Leeminator View Post
    Is there a visual inspection of the carb that I can do that will tell me what size it is?

    There should be numbers stamped on one of the sides.
  • 08-25-2009, 05:15 PM
    Leeminator
    Is there a visual inspection of the carb that I can do that will tell me what size it is?
  • 08-25-2009, 05:13 PM
    MAXXJETT
    Quote Originally Posted by Leeminator View Post
    Thanks FastRat, I will look for Squrtin Thunder....

    MAXXJETT, you are right, 330 HP, A impeller. I don't know the size of carb, only that it is a 4 bbl. I would be very happy with 50-55 mph.

    Thanks for your help

    Jet boats love fuel, I would say that you need about 750cfm carb. There is a good chance that the Edelbrock is only a 600cfm. You may want to run the numbers on the carb, to find out.
  • 08-25-2009, 04:59 PM
    Leeminator
    Thanks FastRat, I will look for Squrtin Thunder....

    MAXXJETT, you are right, 330 HP, A impeller. I don't know the size of carb, only that it is a 4 bbl. I would be very happy with 50-55 mph.

    Thanks for your help
  • 08-25-2009, 04:36 PM
    MAXXJETT
    Quote Originally Posted by Leeminator View Post
    I've got a 21' 1996 Eliminator, 207 Skier, with a Dominator jet. I have 60 hrs on the Dominator pump, 30 hrs on the rebuilt stock 454 motor, with a 4 bbl Edelbrock carb. My max RPM's are 4200, and top speed is 43 mph. I have a place diverter and I have played around with it and all I can sqeeze out is 43 mph. The boat is in Bullhead City and I want a shop with a good reputation to check the engine/pump to see how I can get a little more top end. If I have to take it down to Havasu, no problem. Any help is appreciated.

    With those numbers I would guess that you have about 330HP and an A impeller? Sounds like maybe a fuel problem, unless the pump was not setup right. With those numbers you should see about 50-55mph.

    What size is the Edelbrock?


    Maybe some else can give better advice?
  • 08-25-2009, 04:33 PM
    FastRat
    u might want to check with Jim (Squirtin Thunder) on the boards here...he is located in BHC...he does good work & rebuilds alot of pumps

    FastRat
  • 08-25-2009, 03:22 PM
    Leeminator

    Pump expert in Bullhead/Havasu area

    I've got a 21' 1996 Eliminator, 207 Skier, with a Dominator jet. I have 60 hrs on the Dominator pump, 30 hrs on the rebuilt stock 454 motor, with a 4 bbl Edelbrock carb. My max RPM's are 4200, and top speed is 43 mph. I have a place diverter and I have played around with it and all I can sqeeze out is 43 mph. The boat is in Bullhead City and I want a shop with a good reputation to check the engine/pump to see how I can get a little more top end. If I have to take it down to Havasu, no problem. Any help is appreciated.

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95