Post a reply to the thread: blown 572
Send Trackbacks to (Separate multiple URLs with spaces)
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Please select your insurance company (Optional)
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by x50plt make sure you run a good intercooler, and keep your water temp low 120-140 then run an oil thermostat to stop condensation. I am running these # with 598" motors. I have 2 intercoolers, 1 has bigger end caps for more water flow. I will try both to see the differences.
I never ran an oil thermostat, is it a big deal?
well motor is almost done. needs to go on the dyno, i think this shop is expensive as far as the dyno work. I know it's cheap insurance but ive heard of shops charging $400 for the dyno.
I run the dart 345 none ported head on my pro limited motor , meaning one carb no porting 482 ci made 850 hp @ 7200 it can be done .
make sure you run a good intercooler, and keep your water temp low 120-140 then run an oil thermostat to stop condensation. I am running these # with 598" motors.
I want to be able to run pump.
Anybody have experience with speedomotive
exactly !!!! should not be a problem, now fuel, that might be !!
Anything is possible with more boost!
what do you guys think? I'm having a shop in w covina build me a blown 572. I am using dart 345 heads with a stage 3 porting (using these heads cuz I already had them). motor will have 8.5:1 comp. 14 71 blower with a 749 lift.
Builder says I will make over 1100 hp. Is this possible with these heads?