I would say right around 1,300#s or so. I recently had a 23MTR built with similar layup to what Bob would build a 22 Daytona with and it weighed 1,500#s before rigging, with all bulkheads/knees/floor and 3 fuel tanks in it. The 23MTR is a little bigger boat, that's why I'm guessing around 1,300 for the Daytona. I also had a 21' Trick that I did the math (boat weighed 2,200#s fully rigged w/ 500# outboard motor) to figure the bare hull at around 1,000#s, but I know that boat had a lighter layup schedule than an Eliminator (plus it was a true tunnel/no centerpod = lighter by design).
Maybe helpful - maybe not... But, NADA Home Page has a complete manufacturer and model list - and has the weights for all boats. If you know how much the motor weighs you could subtract that from the total weight and have a good estimate on the boat weight.