I have. Bit of play in my steering. About 2.5-3" of play in outdrive. After diagnosing, I believe that my play is in the tiller arm, not the gimbal ring. When inspecting, no movement was noted between the pin and gimbal ring. I think that all of the play is between the pin and tiller arm. I bought the full kit w/ pin, tiller arm and all of the bushings, washers, etc. and I have watched the Rex Marine videos on the repair. Before tearing into this thing, I was curious if there is anything else that I should check, inspect or perform regular or preventative maintenance on? If I can avoid digging into it twice, I'd like to!