Performance Boats Forum banner

IMCO -3 Shorty Questions

2K views 4 replies 2 participants last post by  Bigblockbill 
#1 · (Edited)
Thinking of going with a shorty on my 1991 Daytona/Fundeck.

Planning on mating it to the Bravo 1 upper, anyone have any good pictures of a B1 and -3 shorty so I can get some ideas of what it will take to move the factory cav. plate?

Has anyone here done it on an early 90's Eliminator and have any results? I am hearing they can really benefit.

Also looking for the Dealer with the best pricing... suggestions?

Anyone have a used -3 (or maybe even -2) for sale?
 
#2 ·
With the -3 lower the prop wind clear upper bravo cav plate. You have to cut the back of upper off to clear. I wouldn't recommend it. I have heard of a couple cutting and welding a step up cav plate to fit?
The -2 lower will bolt up to the stock upper with no mods needed. Imco makes a cav plate extension for the bravo to do this install.
 
#3 ·
Thanks, and Ya I know its will take a bit more work to make a -3 fit, but I am willing to go through the effort. However after looking more into it I need to upgrade to full Hydraulic steering first so the drive thing will have to wait till that gets done.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top