BBC forged parts
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 14 of 23

Thread:
BBC forged parts

  1. #1
    custom member raped southwind's Avatar
    Join Date
    Dec 2007
    Location
    so-cal
    Posts
    466

    Default BBC forged parts

    Looks like my motor just went another way. (stroker instead)

    So here is what i have.

    Mark 4 2 bolt block fresh from machine at .030 over, Magged, Line honed and cleaned $ 250

    468 Forged rotating ASSEMBLY. Factory 7416 forged crank .010rod and .010 main- Bushed 7/16 dimple rods with new hardware - Arais forged dome pistons ( will yeald about 10.5cr with 118 heads)
    I have the flex plate and balancer and this is balanced ready to go. Barry can verify this as i bought the assembly from him!- $700

    Ported 049 heads super clean with new stainless 2.30 / 1.88 valves - $400

    if nothing sells im building another motor!
    Last edited by raped southwind; 11-27-2012 at 01:17 PM.

  2. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  3. #2
    custom member raped southwind's Avatar
    Join Date
    Dec 2007
    Location
    so-cal
    Posts
    466

    Default

    Quote Originally Posted by raped southwind View Post
    Looks like my motor just went another way. ( 498 instead)

    So here is what i have.

    Mark 4 2 bold block fresh from machine at .030 over, Magged, Line honed and cleaned ( i have a dial bore gauge to verify) $ 250

    468 Forged rotating ASSEMBLY. Factory 7416 forged crank .010rod and .010 main- Bushed 7/16 dimple rods with new hardware - Arais forged dome pistons ( will yeald about 10.5cr with 118 heads)
    I have the flex plate and balancer and this is balanced ready to go. Barry can verify this as i bought the assembly from him!- $800

    BBC crower i beam rods with arp studs-$200

    Brand new arp Main stud kit @ bolt $50

    Total Seal ring kit 4.280 bore $75


    All prices are OBO and if nothing sells im building another motor!
    all pms replied!

  4. #3
    custom member raped southwind's Avatar
    Join Date
    Dec 2007
    Location
    so-cal
    Posts
    466

    Default

    Bump.... Will do some trading for a Berkeley impeller!

  5. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  6. #4
    custom member raped southwind's Avatar
    Join Date
    Dec 2007
    Location
    so-cal
    Posts
    466

    Default

    Ttt are my prices high or does no one need parts?

  7. #5
    Senior Member
    Join Date
    Jun 2012
    Location
    tulsa,ok
    Posts
    176

    Default

    I'd be interested in the block maybe if I was closer..what would you take for it shipped out..I live in the 74110 area code. matters how much shipping would cost I guess.
    "its a shame for a man to spend his whole life, not knowing what his body is truly capable of" :Socrates:

  8. #6
    custom member raped southwind's Avatar
    Join Date
    Dec 2007
    Location
    so-cal
    Posts
    466

    Default

    Pm replied. Shipping would prob break the deal. Truck freight can be expensive. Unless u know someone coming west !

  9. #7
    Junior Member
    Join Date
    Nov 2009
    Posts
    3

    Default is Mark 4 2 bolt a 396? or 454? sun valley ca

    Quote Originally Posted by raped southwind View Post
    Looks like my motor just went another way. (stroker instead)

    So here is what i have.

    Mark 4 2 bold block fresh from machine at .030 over, Magged, Line honed and cleaned ( i have a dial bore gauge to verify) $ 250

    468 Forged rotating ASSEMBLY. Factory 7416 forged crank .010rod and .010 main- Bushed 7/16 dimple rods with new hardware - Arais forged dome pistons ( will yeald about 10.5cr with 118 heads)
    I have the flex plate and balancer and this is balanced ready to go. Barry can verify this as i bought the assembly from him!- $800

    BBC crower i beam rods with arp studs-$200 SOLD

    Brand new arp Main stud kit @ bolt $50 SOLD

    Total Seal ring kit 4.280 bore $75 SOLD


    All prices are OBO and if nothing sells im building another motor!
    is Mark 4 a 396 or 454?
    Last edited by maranatha express; 08-17-2012 at 11:22 PM.

  10. #8
    Senior Member ICECREAMAN's Avatar
    Join Date
    May 2009
    Posts
    2,426

    Default

    Quote Originally Posted by maranatha express View Post
    is Mark 4 a 396 or 454?
    MK4 could be either one, but I believe this motor is a 454 .030 over.

  11. #9
    custom member raped southwind's Avatar
    Join Date
    Dec 2007
    Location
    so-cal
    Posts
    466

    Default

    Quote Originally Posted by ICECREAMAN View Post
    MK4 could be either one, but I believe this motor is a 454 .030 over.
    Thanks for the help. You are correct it's a 454 .030 over.

    Sorry I've been super busy and to be honest forgot I had this stuff for sale. I still have all of this! Make offer if interested. It's just collecting dust!

  12. #10
    Senior Member Scapegoat's Avatar
    Join Date
    Feb 2008
    Location
    SoCal
    Posts
    1,067

    Default

    Give me a call if close enough I'll come by and check it out.
    See pm
    Last edited by Scapegoat; 08-21-2012 at 10:22 PM.

  13. #11
    Senior Member
    Join Date
    Dec 2007
    Location
    Newbury Park, Ca/Mohave Valley, Az
    Posts
    8,169

    Default 468??

    Quote Originally Posted by raped southwind View Post
    Thanks for the help. You are correct it's a 454 .030 over.

    Sorry I've been super busy and to be honest forgot I had this stuff for sale. I still have all of this! Make offer if interested. It's just collecting dust!
    So the 468 stuff, (454 +.060) rotating assembly is for a different project?? Or is it all for the .030 over block? (4.280 x 4.0 = 460 inches)...... (4.310 X 4.0 = 468)
    Ray
    LOUD BOATS SAVE LIVES

  14. #12
    custom member raped southwind's Avatar
    Join Date
    Dec 2007
    Location
    so-cal
    Posts
    466

    Default

    Quote Originally Posted by Moneypit View Post
    So the 468 stuff, (454 +.060) rotating assembly is for a different project?? Or is it all for the .030 over block? (4.280 x 4.0 = 460 inches)...... (4.310 X 4.0 = 468)
    Ray
    block is 454 .030 over ie 460

    rotating assembly is 454 .060 over ie 468

    bought the block and then went looking for the rest and came across the rotating assembly . only bad news was it was 060 over pistons. so i was gonna re-bore to fit but i dont need it anymore! i built a 496 instead!

  15. #13
    Senior Member
    Join Date
    Dec 2007
    Location
    Newbury Park, Ca/Mohave Valley, Az
    Posts
    8,169

    Default Ratating assembly

    That is a great price for the 468 stuff!!! Good luck in finding it a good home...
    Ray
    LOUD BOATS SAVE LIVES

  16. #14
    custom member raped southwind's Avatar
    Join Date
    Dec 2007
    Location
    so-cal
    Posts
    466

    Default

    Price drop...

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Please select your insurance company (Optional)

Log-in

Tags for this Thread

Digg This Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95