BBC bare
+ Reply to Thread
Results 1 to 13 of 13

Thread:
BBC bare

  1. #1
    Senior Member jet pilot's Avatar
    Join Date
    Jul 2009
    Location
    Hesperia California
    Posts
    354

    Cool BBC bare

    WTB 454 bare usable block

  2. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  3. #2
    Senior Member 99twentyfive's Avatar
    Join Date
    Dec 2010
    Posts
    203

    Default

    how much are you looking to spend i have a gen 4 untouched block?

  4. #3
    Senior Member
    Join Date
    Aug 2008
    Posts
    357

    Default

    what exactly are you looking for? I have a 1995 gen V 4 bolt marine power 340hp, only 90 hours on it pulled 4900rpm with an A impeller in an 18.5' ultra with set back dominator pump, still sitting in the boat can run for a second if you want...either blew a head gasket or ran my header injection at idle, started messing with the inlet and outlet water valves and next thing i know theres water pooring out the weep holes at idle and i have water in the oil. trailered the boat right away and havnt started it sense. I think I lost a head gasket. I ran it hard 3 days in a row and it never so much as hickuped and always had good oil pressure. looking to sell that carb to pan.

    also have a two bolt block, i believe a 76 high nickel, that i just picked up. was told that it was run for two hours at camp far west and the guy crashed his boat. anyways...it was bored .030 over and has forged pistons. cylinder walls and pistons look great, he at least turned it over with oil every once in a while, but rest of block and crank has surface rust from sitting outside....which the guy forgot to tell me. wont return my calls or texts. also has 702 heads that have surface rust.

    looking to get rid of both. cheap.

  5. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  6. #4
    Senior Member 787chuck's Avatar
    Join Date
    Mar 2009
    Location
    MorePark
    Posts
    541

    Default

    I have what your looking for 2 or 4 bolt ii have them both give me a call 805 304-7261 chuck

  7. #5
    Senior Member jet pilot's Avatar
    Join Date
    Jul 2009
    Location
    Hesperia California
    Posts
    354

    Default

    thank you for all the pm's and reply's I'm hoping to find someone close or in so cal ( to avoid shipping) Looking to pull the trigger in december (my own christmas presant to me) so I dont have to hear the wife whine about that freakin boat again and end up with a butt load of socks and underware.

    Im thinking more about a 496 I can build in my own sweet time. just the way i want it. just need a bare block to start. and I will piece the rest togeather in the next couple years.

    I will call you on friday Chuck. Thanks

  8. #6
    Senior Member 76 Bonneville's Avatar
    Join Date
    Mar 2008
    Location
    Valley Center Ca
    Posts
    744

    Default

    I have a 4 bolt 30 over block.
    Also have a couple 4 1/4 cranks.
    and a set of scat I beam rods.

  9. #7
    Senior Member 99twentyfive's Avatar
    Join Date
    Dec 2010
    Posts
    203

    Default

    im in riverside

  10. #8
    Senior Member jet pilot's Avatar
    Join Date
    Jul 2009
    Location
    Hesperia California
    Posts
    354

    Default

    Quote Originally Posted by 99twentyfive View Post
    how much are you looking to spend i have a gen 4 untouched block?
    what do you want for it?

  11. #9
    Junior Member
    Join Date
    Mar 2009
    Posts
    11

    Default

    Got a gen V block over here in Hesperia if your interested.
    Last edited by gtdan01; 10-11-2012 at 01:27 AM.

  12. #10
    Senior Member jet pilot's Avatar
    Join Date
    Jul 2009
    Location
    Hesperia California
    Posts
    354

    Default

    Quote Originally Posted by gtdan01 View Post
    Got a gen V block over here in Hesperia if your interested.
    PM sent

  13. #11
    Senior Member
    Join Date
    May 2008
    Location
    Douglas, MA
    Posts
    1,234

    Default

    Quote Originally Posted by 76 Bonneville View Post
    I have a 4 bolt 30 over block.
    Also have a couple 4 1/4 cranks.
    and a set of scat I beam rods.
    Would love more info on the crank and rods...

  14. #12
    Senior Member hiline's Avatar
    Join Date
    May 2008
    Location
    El Dorado Hills, Ca
    Posts
    366

    Default

    I have a std Gen 5, block.. 4 bolt main if your interested,had 12K miles on it when it was taken apart.
    $350
    Tony 916 933-5750
    In Nor cal but drive to S call all the time.
    Hi Line Motorsports Inc.
    El Dorado Hills, Calif.
    Multiple boats..

  15. #13
    Senior Member jet pilot's Avatar
    Join Date
    Jul 2009
    Location
    Hesperia California
    Posts
    354

    Default

    sorry I haven't got back to some of you, the last couple weeks have been screwed up one way or another.

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Please select your insurance company (Optional)

Log-in

Tags for this Thread

Digg This Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95