I tried NAPA and some other specialty place - they said I was screwed - so i ask - can I bond a piece of stainless steal to polypropalene with an epoxy that will stand up to gas? I wa shtinking of cutting the neck off and bonding a stasinless flange to the tank that has a 2" neck?
I dont know how much you need, but when I had to replace the hose between my fuel tank and fuel fill neck. I only needed about 4-5 inches, so I went to Napa and bought some hose. My old part was a Gates 24032 had 51mm on one side. The napa part is missing some #'s but I will give you what I have,(Printed on the side)Belts/Hose 613S... and the other side was missing the first part of the UPC code, ....69 32759. I dont know if this will help, but thats all the info I can give.