Edelbrock Polished Tunelram with 650's Complete everything Needed to bolt tunelram on
+ Reply to Thread
Results 1 to 8 of 8

Thread:
Edelbrock Polished Tunelram with 650's Complete everything Needed to bolt tunelram on

  1. #1
    V-Drive 4 ever Billdoe's Avatar
    Join Date
    Jan 2008
    Location
    Greenwood , Calif
    Posts
    1,810

    Default Edelbrock Polished Tunelram with 650's Complete everything Needed to bolt tunelram on

    Edelbrock Tunnel ram for BBC with Rec ports. Polished ram comes with 2 650 double pump holley carbs , comes with all Braided lines, comes with Fuel press. regulator, comes with all Linkage for side mount carbs , Carbs have the Hard Stainless lines .Also have the 2 cheap spark arrestors for it. this setup was on a 468 BBC making around 600 hp . only selling to go to a Single carb setup . will do a part trade if you have a 950 or 930 cfm Carb . located in N.Cal above Auburn . Bill 530-333-1047 .. 1000.00
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20160111_204611.jpg 
Views:	44 
Size:	20.8 KB 
ID:	835338   Click image for larger version. 

Name:	20160111_204634.jpg 
Views:	43 
Size:	11.4 KB 
ID:	835346   Click image for larger version. 

Name:	20160111_204651.jpg 
Views:	45 
Size:	15.7 KB 
ID:	835354  

  2. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  3. #2
    ptc
    ptc is offline
    Senior Member ptc's Avatar
    Join Date
    Oct 2010
    Location
    Sacramento Area
    Posts
    3,755

    Default

    Hey Bill I just picked up a Victor 454-R for a rect port and a 4500 flange if you need it.
    1975 Sanger True Flat - 496 BBC
    http://v-drivecalifornia.blogspot.com/

  4. #3
    V-Drive 4 ever Billdoe's Avatar
    Join Date
    Jan 2008
    Location
    Greenwood , Calif
    Posts
    1,810

    Default

    Quote Originally Posted by ptc View Post
    Hey Bill I just picked up a Victor 454-R for a rect port and a 4500 flange if you need it.
    you get rid of the air gap? i would of brought the sway bar with yesterday i was in Ione and forgot i took it out of my truck.. Not looking for a high RPM like a Victor . this thing is going to be a 5500-6500 max rpm deal . just a putt putt not using a dominator on it either just a 850-950 max carb..

  5. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  6. #4
    Jackwagon Patrolman Rexone's Avatar
    Join Date
    Dec 2007
    Location
    The Earth
    Posts
    11,646
    Blog Entries
    24

    Default

    The tunnel ram in the photo above appears to be a Weiand not Edelbrock. Weiand #1983 as I recall.

  7. #5
    V-Drive 4 ever Billdoe's Avatar
    Join Date
    Jan 2008
    Location
    Greenwood , Calif
    Posts
    1,810

    Default

    Quote Originally Posted by Rexone View Post
    The tunnel ram in the photo above appears to be a Weiand not Edelbrock. Weiand #1983 as I recall.
    i looked up the 1983 model and others by Wieand ,it doesn't look the same as they show. I went out and pulled the top 1/2 off and there is NO Name anywhere like they polished it smooth and removed it.. they do show a Mopar one that has the same groves running thru the Valley of it so it looks identical to a Mopar Wieand one lol . top looks different but bottom looks same so you got me lol... Very nice polish job tho

    here's a link showing the carbs.. they are a 4150 series 4777-5
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20160113_102349.jpg 
Views:	25 
Size:	24.0 KB 
ID:	835809   Click image for larger version. 

Name:	20160113_102404.jpg 
Views:	24 
Size:	25.9 KB 
ID:	835817   Click image for larger version. 

Name:	20160113_102451.jpg 
Views:	23 
Size:	24.6 KB 
ID:	835825   Click image for larger version. 

Name:	20160113_102429.jpg 
Views:	21 
Size:	18.1 KB 
ID:	835833  
    Last edited by Billdoe; 01-13-2016 at 10:30 AM.

  8. #6
    Jackwagon Patrolman Rexone's Avatar
    Join Date
    Dec 2007
    Location
    The Earth
    Posts
    11,646
    Blog Entries
    24

    Default

    I'm sure they no longer make the 1983. But I've had several of them over the years. The 1983 bolts together externally. They made a different tunnel ram also, 1985, which bolted together from the inside. These were both made in the prior century, both had 9 5/8 center to center carbs spacing. Its a good manifold and the one you have looks nice. These were made in the same era as the Edelbrock TR-2X, which had a much taller plenum section than the Weiand. Edelbrock then discontinued the TR-2X and came out with a lower plenum manifold for which I can't recall the part number now. I sold a lot of these back in the 70's - 90's which is the only reason I know the part numbers.

  9. #7
    Member RustyNCA's Avatar
    Join Date
    Jul 2015
    Location
    Redding, CA
    Posts
    48

    Default

    Bummer, and I just bought two 650 carbs Monday

  10. #8
    V-Drive 4 ever Billdoe's Avatar
    Join Date
    Jan 2008
    Location
    Greenwood , Calif
    Posts
    1,810

    Default

    possible deal pending.. part trade/cash

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Please select your insurance company (Optional)

Log-in

Tags for this Thread

Digg This Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95