Canfield 310's...new
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 14 of 22

Thread:
Canfield 310's...new

  1. #1
    steelcomp was here
    Join Date
    Dec 2007
    Location
    n/e TN
    Posts
    26,333

    Default Canfield 310's...new ALL SOLD

    ALL SOLD
    I have 5 sets of new/old stock Canfield 310's I'm building to customer's specs. I believe these are the last 5 sets availablbe.
    These are bare heads that will be built on a per-customer basis, depending on the engine and application. I 've set a base price for a pair as follows:
    2.25/1.88 stainless severe duty REV valve, flat tappet or hyd. roller spring (good quality super clean silicone wire) 4140 steel 10* retainers and keepers, studs and guide plates (American made), 5 angle intake, radiused ex. valve job with bowls blended, CNC 119cc chambers, flow sheets included. Intakes will flow somewhere around 350-355 @ .700, ex will be around 290 @ .800.
    Price: 2150.00 shipped
    Upgrades go from there...roller springs, Ti rtainers, bigger valves, porting, milling, etc.
    These aren't production line heads, they're built one at a time, fully assembled and ready to run. Guaranteed. I also have head studs,, head gaskets, stud girdles..anything else you might need.
    Call me at 805 350 1159
    PM if interested.
    Last edited by scott foxwell; 09-18-2010 at 03:30 PM.

  2. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  3. #2
    Senior Member EdonShano's Avatar
    Join Date
    Dec 2007
    Location
    Arroyo Grande
    Posts
    2,129

    Default

    you have a PM
    Formally know as UNFORGIVEN...

  4. #3
    Member B-RIE's Avatar
    Join Date
    Jan 2008
    Location
    corona
    Posts
    94

    Default heads

    If you can call me and let me know what you want for the heads that would be great. My number is 909 224 7490. thank you
    Brian

  5. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  6. #4
    Senior Member propless's Avatar
    Join Date
    Dec 2007
    Location
    Clovis, Cali
    Posts
    623

    Default

    Pm sent

  7. #5
    steelcomp was here
    Join Date
    Dec 2007
    Location
    n/e TN
    Posts
    26,333

    Default

    bump

  8. #6
    Senior Member EdonShano's Avatar
    Join Date
    Dec 2007
    Location
    Arroyo Grande
    Posts
    2,129

    Default

    you never gave us a price.... But I'll take the good neighbor deal...
    Formally know as UNFORGIVEN...

  9. #7
    LAID IN MEXICO
    Join Date
    Feb 2008
    Location
    santa paula, ca
    Posts
    750

    Default heads

    do you have a trade in program?

  10. #8
    Senior Member EdonShano's Avatar
    Join Date
    Dec 2007
    Location
    Arroyo Grande
    Posts
    2,129

    Default

    Quote Originally Posted by steelcomp View Post

    Price depends on the build. These are bare heads that need seats and guides finished. My thinking is to build them on a per-customer basis, depending on the engine and application. I guess a base price could be set for a 2.25/1.88 stainless severe duty REV valve, flat tappet or hyd. roller spring (good quality super clean silicone wire) 4140 steel 10* retainers and keepers, studs and guide plates (American made), 5 angle intake, radiused ex. valve job with bowls blended, CNC 119cc chambers, flow sheets included. Intakes will flow somewhere around 350-355 @ .700, ex will be around 290 @ .800. How's 2150.00 shipped? Upgrades go from there...roller springs, Ti rtainers, bigger valves, porting, milling, etc. These aren't production line heads, they're built right, they're clean, and ready to run. Guaranteed. I also have head studs,, head gaskets, stud girdles..anything else you might need.
    Call me at 805 350 1159
    shipping??? does that mean you'll deliver to my house and drink a few beers since I'm a 1/4 mile away?
    Formally know as UNFORGIVEN...

  11. #9
    steelcomp was here
    Join Date
    Dec 2007
    Location
    n/e TN
    Posts
    26,333

    Default

    Buncha comedians here.
    I'm home this weekend...I'll give you a call Eddie, or stop by.

  12. #10
    gn7
    gn7 is offline
    Senior Member gn7's Avatar
    Join Date
    Jan 2008
    Posts
    25,975

    Default

    Quote Originally Posted by nelson#109 View Post
    do you have a trade in program?
    Yeah, I heard this is a upgrade program, he will take any alumn head in trade except ProComp and Patriot.

    Will trade straight across for new and unused, New Old Stock 077 alumn BBC GM heads



    100% free webcam site! | Awesome chicks and it is absolutely free! | Watch free live sex cam - easy as 1-2-3
    Last edited by gn7; 07-30-2010 at 09:10 PM.

  13. #11
    steelcomp was here
    Join Date
    Dec 2007
    Location
    n/e TN
    Posts
    26,333

    Default

    bump

  14. #12
    steelcomp was here
    Join Date
    Dec 2007
    Location
    n/e TN
    Posts
    26,333

    Default

    still have a few left...

  15. #13
    Senior Member EdonShano's Avatar
    Join Date
    Dec 2007
    Location
    Arroyo Grande
    Posts
    2,129

    Default

    1 set is MINE!!
    Formally know as UNFORGIVEN...

  16. #14
    steelcomp was here
    Join Date
    Dec 2007
    Location
    n/e TN
    Posts
    26,333

    Default

    Quote Originally Posted by Unforgiven View Post
    1 set is MINE!!
    Grinding on yours all day today.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Please select your insurance company (Optional)

Log-in

Digg This Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95