Lenco, trim tabs, bennet trim tabs, yamaha lowers units, and more
Decided to just part out my boat project. It is a 1981 is a 28' master marine/ true world marine. I am also selling parts off of my smaller boat to fund a radical repower project. The engine is already sold though. Everything is located in Lake Charles, LA 70601 Here is a list:
264 Mako Console. Purchased from Four Sons Marine and never used $600
Bennet Trim tab package. 16" long x 12" wide edge mount,Performace Sport tab series, dual ram. Used very little. Includs pump, wiring, and switch out of a 21' Chris Craft $600
Lenco Heavy Duty Sport Tabs. 18" long x 12" wide, single ram. Never used but dirty for sitting so long. Includes control box, wiring harness, and led control switch. $600
Florida marine fuel tank. Built in 1981. No corrosion. Has had second pickup welded in. Has been sanded and primed on all 4 sided with zinc cromate primer. Coal tar epoxy primed on bottom and sides. Measure 96" long, 12 1/4" deep on the outside, 14 1/4 deep in the middle, 8.5" from 12 1/4 outside corner to where the 14 1/4" bottom starts. 150 gallons. $600
RDS Fuel Tank. Brand new, no fuel ever added. Includes dual pickups, dual returns, sending unit. Has been sanded on all sided, zinc cromate, and coal tar epoxy on all sides except top. 100 gallons. Measures 65.5 long, 14" deep in the middle, 11.5" on the sides, and 28" wide, 6.5" from corner 11.5" to 14" bottom. $600
Everything I have read and researched say the boat I had these in(28' 1981 master marine) says they will fit alot of makos. If I remember correctly, the 100 gallon tank was actually destined for a Mako.
Bennett hydraulic hatch actuator and rams. Rams are the 24" dual acting series. Actuator, rams, switch, and wiring included. $400
Non swept back style Bravo I diesel outdrive assmebly. Is setup for remote resovoir. 1.5 gear ratio, and in cludes 17pitch stainless Mirage Plus prop.$1500; Trim rams, steering, and transom assembly are for sale, but extra. $2500 for all
1 counter rotating lower unit for a 25" 2 stroke 225 or 250 3.1l or 3.3l 2 stroke engine. Will not fit 4strokes. $750
I also have a pair of 1996 or 97 Yamaha V-76, 3.1L, Carbed, counter rotating,25" 250 engines for sale along with ALOT of spares; a 1981 Master Marine 28' "Good Go" hull that has been partially restored; an aluminum t-top with an 8x8 top and comes with e-box; and a 2007(11/07) Tarpon 27-29ft triple axel trailer, dual electric over hydraulic disk brakes on front 2 axels, 10k gwr. Email for more info
I have pics on image shack. Here is the link. I will go through and organize them tonight. If you want a pic of something sent to you, just shoot me a pm or email.
I am leaving the country for vacation on the 14th of April. I start my official vacation on Thursday April 7th, so there is absolutly no chance of me going to work or having any reason not to be able to ship your parts. Anything paid for by paypal before 3pm will be delivered to UPS or a freight company and scheduled for shipment the same day(doesnt mean it will ship that day, but it will be in their hands and in their system).You are also free to come pick up anything in person in Lake Charles, LA. Anything paid for after 3pm April 13th will not ship until May 6th. I will hold anything for a 15% deposit made through paypal, up to 6 weeks. I am tentativley going to work in Saudi Arabia around July or August and do not plan to be back in the US much during the next few years. This is the reason for selling off what I have rather than just have it rot while I am gone. All prices are very reasonable in my opinion, but if you dont agree, make a reasonable offer.
Feel free to email me at [email protected] or call me at 409-344-0620 or 773-598-4667 Thanks, Patrick
Last edited by offshoreonly; 04-05-2011 at 07:10 PM.