Need Hydro Prop
+ Reply to Thread
Results 1 to 11 of 11

Thread:
Need Hydro Prop

  1. #1
    Senior Member wagspe208's Avatar
    Join Date
    Apr 2008
    Location
    waterloo
    Posts
    2,034

    Default Need Hydro Prop

    Who are the go to guys now days? I cracked a prop last pass at the lake last weekend. It had been repaired before. It is done. Shelf piece.
    Who is building them? And will work with what I want?
    Wags

  2. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  3. #2
    Senior Member
    Join Date
    Aug 2009
    Posts
    158

    Default

    Quote Originally Posted by wagspe208 View Post
    Who are the go to guys now days? I cracked a prop last pass at the lake last weekend. It had been repaired before. It is done. Shelf piece.
    Who is building them? And will work with what I want?
    Wags
    Harold's stuff is good, might try Sheflo, he may have what your looking for on the shelf depending on your shaft size, I know 1-1/4 stuff can be a pain if your in a hurry.

  4. #3
    Member
    Join Date
    Apr 2009
    Posts
    30

    Default prop

    Quote Originally Posted by wagspe208 View Post
    Who are the go to guys now days? I cracked a prop last pass at the lake last weekend. It had been repaired before. It is done. Shelf piece.
    Who is building them? And will work with what I want?
    Wags
    Harold Kindsvater 559-299-2328 he has most any prop you want on the shelf

  5. Remove Advertisements
    PerformanceBoats.com
    Advertisements
     

  6. #4
    Senior Member Bubbletop409's Avatar
    Join Date
    Jan 2008
    Location
    Castro Valley, State of Insanity
    Posts
    1,411

    Default

    Harold did a great job refreshing my good Menkens, and was able to determine the problem with my bad Menkens when no one else could, highly recommended.
    Larry

    62 Bel-Air 409
    260 Eagle XP HP500EFI
    2016 Corvette Z51
    79 Cole TR-2 Sunset Racecraft 565 (RIP Tracy)
    Remember in November
    Well done USN Seal Team 6

  7. #5
    Senior Member wagspe208's Avatar
    Join Date
    Apr 2008
    Location
    waterloo
    Posts
    2,034

    Default

    I didn't know Harodl was still making props. Any one deal with dallas menkins?
    Thanks
    I'll give harold a call
    Wags

  8. #6
    Senior Member wagspe208's Avatar
    Join Date
    Apr 2008
    Location
    waterloo
    Posts
    2,034

    Default

    Called Harold Friday. Very nice guy. I know he knows his shit. No surprise there.... I am pretty sure I will have to send the prop back a few times. He wouldn't send me what I wanted cause I was racing wrong.
    I will give it an honest shot. He knows his shit..... but many ways to skin a cat.... plus I like to go 150+, 130 to 140 would be so fucking boring.
    Wags

  9. #7
    Junior Member
    Join Date
    Oct 2012
    Posts
    16

    Default

    Quote Originally Posted by wagspe208 View Post
    Who are the go to guys now days? I cracked a prop last pass at the lake last weekend. It had been repaired before. It is done. Shelf piece.
    Who is building them? And will work with what I want?
    Wags
    I have a post in Propellers titled Cleaver Prop. Look at it. This is a great prop with very little use. Thanks, Little John

  10. #8
    Senior Member wagspe208's Avatar
    Join Date
    Apr 2008
    Location
    waterloo
    Posts
    2,034

    Default

    NOT BAD MOUTHING....
    Harolds shit hookws so frickin hard..... it hooks hard...
    I need to get mine cut down about 1/2".
    He knows his shit, though.
    Wags

  11. #9
    Senior Member steveo143's Avatar
    Join Date
    Dec 2007
    Location
    Placentia, CA
    Posts
    3,360

    Default

    He has retired!!!!!!!!!!!!!
    steveo143 AKA DiMarco 21 II



    Now totally Green on E-85, saving the world one ear of corn at a time!
    RIP Davey B and Denis and Chris and Bob GN7

  12. #10
    Senior Member jdekruyf's Avatar
    Join Date
    Jun 2011
    Location
    Artesia, CA
    Posts
    688

    Default

    Quote Originally Posted by steveo143 View Post
    He has retired!!!!!!!!!!!!!
    Yup. Found this out yesterday when I called him. He recommended Kevin at R&R in Henderson Nevada.

    Kevin was very cool on the phone and was very informative. Sending mine to him to get reworked.

  13. #11
    Senior Member
    Join Date
    Aug 2009
    Posts
    158

    Default

    Quote Originally Posted by wagspe208 View Post
    NOT BAD MOUTHING....
    Harolds shit hookws so frickin hard..... it hooks hard...
    I need to get mine cut down about 1/2".
    He knows his shit, though.
    Wags
    What size did the prop start out as if you don't mind me asking?

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Please select your insurance company (Optional)

Log-in

Tags for this Thread

Digg This Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •  
 

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95