Search:

Takes a good amount of work to make them go a decent speed.

Mine is a heavy layup, very thick and sterdy.

With a stock Berk JC pump it went 58mph @ 5000rpm A Impeller.

Now with a worked...

Or you can switch it over to e85. Runs very cool, makes more power, 115ish Octane, and only $3.80 a gallon. Rebuild the carb to alcohol standards, make sure you're fuel pump is up to the task, and...

Last summer I was boating in Laughlin/Bullhead and had pulled over in a cover to find a nice Cole T-Deck runner bottom. As I was driving a T-Deck Hondo Jet boat with the same fiberglass scoop I...

Go with the 900xp without a doubt, already the 800's are falling off in value dramatically. Stock 800 has about 30hp, the stock 900 has about 70hp to the wheels, and the RPM range is much broader....

I have an older berkley split bowl, and it's very long/tall like the aggressors. And it is water lubricated, no grease or oil. Do the aggressors have grease fittings? From berkley my bowl only had a...

I've seen the spring thing a few times, but on the handle side of the forward/reverse. Best setup I've seen so far

So you let off 150' before the traps but it only lost 8mph in speed.... :)sphss I don't know how you can get so many people worked up in these threads, no one actually looks at your camp as...

So the rumor is true. I've been meaning to go by and check them out, been thinking of a new hull if the price is right...

An A-Frame is the only way to do it well, easily makes it a 1 person job. This one was bought at a garage sale for $10, and it has casters on the feet to move, and an I-Beam to move the weight left...

I have a "turn fin" in my boat, complete night and day difference.... used to want to get loose during any powerful turn, now I can just about go wide open during a turn. Use the search feature and...

Yessir, and I be livin in El Cajon too! ;)

Anyone else got pics of what they're running?

Where are you guys getting your steering setups? I have the hub with the tapered squared dealio that goes into the column, they're sloppy and I would like to replace them.

Any advice?

Thanks for the tips Andrew and correcting my assumptions, I guess I've just been chasing the sweet spot of AR's on my single cylinder quad now for years :happy: forgot how much simpler the...

Just checked out the ebay turbos, the AR's only .70 on the compressor side, will that be enough for a V8 like this?

Thanks for the comments guys. I kinda wanted to stay away from the larger Garrett turbos if possible, they're pretty expensive. I would like to try a "chinese" setup and first just to see if it'll...

Don't really have a goal on boost. Kinda want it to be some-what turbo laggy so I can keep my 60 foot times kinda higher, but have killer top end for running normal dial-in brackets. I think 20psi...

Hey fellas. I know this is a boating forum but I know many have a wealth of knowledge in this area. I've played with turbo setups a little here and there and wanted to see what you guys would think...

The fellas running in that class were shooting for 6.0, just because a turbo boat went that fast does not mean in any way that the other nitrous boats couldn't... since they were trying to slow...

Don't have to have full stringers. And any induction is fine, blown, turbo etc... just can't go past 80.9

I love jet boats to death buuuuttt....


For a 21' foot boat, you'd probably be better with an outboard setup. A ton more of interior room, alot easier on gas, typically a little faster than a...

How would you compare Martinez Vs. the Butte?

With the pump options available now adays inefficient-pumps are becomming a thing of the past. This ain't the 80's, pumps have come alot furthur than your dad's 1972 Tahiti with a stock pump and an...

The dyno is just a tuning tool, hook it up in your boat to turn your determined RPM and let it rip :cool: Just like chassis dynos, flowbench's, shock dynos... they're all a little different, I...

It's just the internet, you could have just let that comment go instead of posting that, but apparently you felt the need to try and bring the guy down farther.

You're an insensitive asshole,...