make / manufacturer: Ford
model name / number: 460
I have a 460 Big Block Ford complete marine engine for sale. It was in a jet boat. The engine has low hours on rebuild from 3 years ago. The boat was used maybe 5 to 6 times each season. If I had to put a number on it I would have to say around...
New motor built by LakesOnly.
BBF 460 .060" over (473) has maybe 2 hours on it.
Ported C9 heads.
Eagle H Beam rods.
Brand new pair of Holley 650 DP's.
Accel dist with Pertronics ignitor.
Milodon 10 QT oil pan modified for no pressure loss when you decelerate...
Hey guy i just bought my first jet boat a 1979 Hawiian Bubble. Im a just a young car guy and don't know much about these so i may have questions along the way. The boat most recently had a ford 460 in it.
I picked up the boat from a friend of a friend for 1000$ no motor and only parts of the...
460 Blower Motor FOR SALE !!!!
460 .040 over
Block studded top & bottom
Hampton 871 Blower
currently 10% under
Arias Forged Pistons
Total Seal Rings
Alum Blue Thunder Heads Stage II
Isky Roller Cam & Lifters
Comp Aluminum Roller Rockers
Comp Push Rods & Guide...
Good set of bare bbf a2a heads need to be tanked 150.00
Set of c8ve heads one head needs repair dropped a valve all manley parts double springs, pushrod guides 175.00
2 sets stainless through hull tips 100.00 per set
Bbf tunnel ram with dual holley 750 and Dooley scoop 750.00 OBO
Up for sale is a pair of freshly rebuild and polished Harman Marine Ford 460 exhaust logs with matching risers/snails. All mounting surfaces have been trued and new gaskets between log and risers have been installed. These are in excellent condition with absolutely no scratches, cracks or other...
Looking for parts for my BBF project. Need 10 quart oil pan w/tray, ready to run or pro-billet distributor, spark plug wires, 850-1050 holley carb, water pump back plate, jet boat headers, motor mounts, etc. Got parts you want to sell?
Message me or text 210-307-9844
Looking for a good running BBF for my 19' jet boat.
Not in a hurry, just planning ahead for next summer.
Don't need anything too insane, just want to do 60mph and have some fun.
I am in Modesto.
PISTONS ARE SOLD
Selling one set of brand new SRP 150727 stroker pistons. Typically used with a 4.14" or 4.15" stroker crankshaft and 6.800" rods. Standard valve layout for cylinder heads such as C8VE, C9VE, D0VE, 75 cc Edelbrock, 95cc Edelbrock, TFS 74cc Street/Strip, Blue Thunder Cobra jet...
new to the list here, but not new to boating or related mechanical work, just sidelined 30 years thanks to repeated injuries and eventual total disability that after 12 years I've reduced to a minimum, picking up where I left off in my dad's words "wasting my time" learning to...
Well Im breaking in my 07 liberator 21 tunnel 460 motor built a little 430 or so hp, dom pump, when the water intake hose came off and hull flooded a little over my fuel pump.So then i noticed the water on the carpet and then looked at water temp guage it was pegged,I shut it down then put the...
Last week I purchased an 1976 Omega 21' Open Bow with a 460. The previous owner had said that he went through the engine and freshened it up recently. When we started it upon purchasing it it was reading 55 psi cold. Well I bought it and took it to the lake and about 15 minutes into it I have 0...
So I put together a rebuilt 460 .030 over forged pistons stock rods crank, and stock d3ve heads
When intalling the cam witch is a crane cam (.488/.509). Aligned the cam ant timing sprockets straight up. It has a weiand dual tunnel ram with Holley 450s in good shape. I'm 4 degrees advanced at...
I bought this '77 19' Dominator Jet boat. It has a Ford 460 engine in it and runs like crap. Well it doesn't run at all really. It starts for a couple seconds then dies. I'm determined its the carb. Where should I begin...the carb does not look like its stock. It has Holley stamped on the...
So as many of you know I blew up my engine last weekend. Anyone have any parts laying around that they want to part with for a 460 or Berkeley? I would be interested in any BBF parts or even a complete engine. Also looking to add a split bowl, droop, and Place Diverter... Whatcha got???