Performance Boats Forum banner

aka

  1. GN7 On the Dyno
    Just finished a build for Mike Edmondson's Bounty Hunter; Build detailas: Brodix alum block, 4.53 bore 4.375 center counterweight crank Carillo 6.7 rods CP 14.5:1 pistons w/ Line2line coating Total Seal M1 top, napier 2nd, .043/.043 / 3mm rings DLC coated heavy wall tool steel pins 55mm...
  2. V-Drives
    I NOTICED PAT HASNT POST MUCH ON HERE SINCE JUNE...........THEN I SAW THIS..TODAY ON HERE IN THE PARTS SECTION...................... Join DateDec 2007LocationSan Joaquin County, CAPosts139 Slotracer's Garage Sale Some of you probably knew or dealt with Slotracer(Pat) here on the board. Pat...
  3. WFL Crew
    The very well known and highly respected very knowledgeable a great friend, family man and devoted Christian. It is with a very heavy heart that I have been asked to inform all of our boating community that Steven Smith (Atlanta Texas) AKA“Gearhead” was killed in an accident yesterday- prayers...
  4. Jet Boats
    The very well known and highly respected very knowledgeable a great friend, family man and devoted Christian. It is with a very heavy heart that I have been asked to inform all of our boating community that Steven Smith (Atlanta Texas) AKA“Gearhead” was killed in an accident yesterday -...
  5. V-Drives
    I came across this picture the other day and was told this was taken just after it was bought from Julian. This was (from what I understand) the K-50 Coldfire that Julian won three championships with. After he was done with it Lee Anderson bought it and renamed it Miss Downtown. It was raced by...
  6. Parts for Sale
    I' m looking for a decent looking breather vent tank that can bolt on the back of a blower. If you have one to sell please let me know via PM. Thanks
  7. V-Drives
    This past weekend at the CDBA race in Dexter Or. Rob was on fire. he was cutting lights left and right in fact he had 2 .006 lights along with a bunch of .0 lights. he also ran 9.02,9.02,9.04,9.08 on Sat. come race day he walked away with a 1st in the 9's and a 1st in Super E class, along with...
  8. Boats for Sale
    1986 Sidewinder18ss (Thompson) 460 jet $3500 1986 Sidewinder 18ss (by Thompson) with 460 Berkley jet for sale These boats are a classic factory hot boat. Runs great. Fast Length 17’8”, beam 84”, weight=1900#, 460 ci Ford, Berkley 12 Jet drive, Place performance diverter for incredible...
  9. Political Rhetoric
    Just had this sent to me by a friend....Looks like ole Jerry is up to his tricks again, probably realized that soon there might just be a armed uprising in Cali. CONTACT GOVERNOR BROWN TODAY!! This year the California Legislature passed the most restrictive collection of anti-gun...
  10. GN7 On the Dyno
    So Bob's I have this engine and my CHT temps are High on Cylinders 1,2,and 9 :D The EGT's are within 75 deg over all nine. Oil temp climes to near red line at low to mid power settings. The engine is 6:1 CR with a blower I run 100LL only timing is "locked out at 25' with dual mags. The Prop is...
  11. V-Drives
    Here's tippin a cold one to you HUD.. Hope you have a great birthday, and may you even build bigger smoke this year. Love ya pal. :party1::gathering::bananadance:
  12. V-Drives
    I finally have his permission to post. He came back from world finals extremely sick. He also took a bad fall that landed him in the hospital with a punctured lung and a couple broken ribs. I talk to him this morning and he is feeling much better. Much thanks to my little sister Karla for...
  13. PB Open Water
    Happy Birthday Patty....birthday beer is on me for the finals in Chandler!! Cheers!:party1:
  14. Parts for Sale
    bought the jacuzzi parts pump on here a few weeks ago 8-22, havent heard from him. now the cell number is disconnected. any help would be great. address was in apple valley? thanks, ted
  15. V-Drives
    Does anyone know how to get ahold of 396_Ways_To_Spit aka Michael O'banion. He received some money from me two weeks ago for a manifold he had for sale and I have not heard from him since. The phone number he gave me is no longer good. If anyone could help me locate him in Mesa, AZ or get this...
  16. Jet Boats
    Does anyone know how to get ahold of 396_Ways_To_Spit aka Michael O'banion. He received some money from me two weeks ago for a manifold he had for sale and I have not heard from him since. The phone number he gave me is no longer good. If anyone could help me locate him in Mesa, AZ or get this...
  17. V-Drives
    for not only drilling all the holes in my plates & hull, making me some bitchen -16 dumps out of through hull fittings that only cost me $11 each but for making me these trick -16 stainless pick ups that point straight up, but for doing it all for a fair price!
  18. WFL Crew
    Hey Fellas I was wondering whats worth saving and whats not. IMO all wingers need saved no matter how bad of shape minus the hull is in 20 pieces!!!! My boat had been sitting in guys back yard uncovered for almost 10 years. It needed everything, and still needs a ton of work. But in less than...
  19. Jet Boats
    I want to thank my best friend Mark Michaelson for letting me use his boat at the races this weekend. Mark has proven time and time again to be a true friend... I don't know anyone who would have said "come get my boat".... I truly appreciate Mark and can't thank him enough for always being...
  20. Michigan Hot Boats
    happy birthday Elkidminoltu !
Top