Search Results for ‘assembly’

Never installed into my truck. 13.5 ring gear. 14 bolt. 3:73 ratio. $800.00

Parted out a 21 schiada that was bring converted to a O/B and don't need the drive. Everything looks to be in good shape. The previous owner stated it was a newer upper and rebuilt lower. He advised that Tim at Dirty Deeds in parker did the rebuild (I do have a picture showing the work being...

Berkley nozzle housing and rudder assembly used but in decent condition, located in Havasu , asking 135.00 Obo + shipping, Call Wally 928-486-1787

Stringer mount anodized foot throttle assembly, located in Havasu selling this for a friend ! asking 95.00 Obo + shipping Call Wally 928-486-1787

I have a *NEW* Aluminum Transom assembly. Will work on COLE, HONDO, CANYON, MAKO, DIMARCO, and other runner bottoms, Includes: 1" Transom shaft, Transom Arm, (10) ea. of the following: Turnbuckles, eye levers, plate boses. As shown. $1200. Also have a *NEW* Magnesium Enderle Buzzard catcher...

Let me know what ya got and how much. Thanks Bill

Who makes a throttle/down pedal assembly like this one....

Is there a difference between a bravo transom assembly and a alpha transom assembly? If so, what is the difference? Thanks

I'm in the process of reassembling my 1977 Sanger Family ski. It has been apart for about five years and I'm stuck on the quadrant and tiller. I thought I had plenty of notes and images, but can't find (or lost) anything for the reassembly of that area. I'm sure I can put it back together, but...

I'm building a hondo runner bottom and am after a complete cav plate setup. If someone can help with parts or maybe point me in the right place, I would sure appreciate it thanks, Cole 9284516335

I have an older boat I bought last year, it ran great all summer and never appeared to have any water leaks. I took it out over Easter weekend and noticed when the boat sat for a while water would collect in the bilge. With the kids sitting on the swim step I started looking for the leak and...

I'm trying to freshen up my cavitation pedal assembly and I need some help trying to locate new gears. I've looked through several catalogs and either I don't understand what I have or the catalogs I've looked at don't offer the pitch that I have. The gears I have are .5" wide, with 24 teeth...

Looking for this type of setup. If anyone one has something similar please PM me. Thank You

please delete (1 set (8)) forged SRP Pistons S75FS, #P/N231513, 768176 (Info 231513 Product Detail Information - JE Pistons) (1 set (8) Eagle forged H-Beam Rods #ESP63853DL19 L=6.385 (1) 10/10 Eagle Forged Crank #5140, 454, (4.750 Stroke) 40hrs on motor when it was torn down and built for a...

496 Eagle steel crank, Eagle H-beam rods and Srp pistons Posting this for a friend. Complete Eagle Gen V 496 rotating assembly. Can be used with gen VI also. Its internally balanced. The parts have less than an hour run time. Motor was fired 3 times and shut down. Was built by a shop and...

Going to spend this winter rebuilding my 496 mag ho, but I want to put in new high strength components. I already have a Raylar kit on the top end with new cam, intake, and aluminum heads, looking for my best options for a forged rotating assembly. Raylar has one for about 2700 bucks that...

I need a Timken front wheel axle hub bearing assembly for a 2500hd 2WD. Anyone know of a shop in or around OC that would have them in stock? They're everywhere online, but I need one asap or my rivertip this weekend is canceled! Thanks

Looks like I need a new distributor assembly and they want around 700 for a Mercury one. That would keep me off the water for a while. It seems like there has to be an aftermarket "marine" one or I am sure there are a slew of aftermarket small block Chevy options? I just don't know how to find...

mercury hp transom assembly with electric trim sending unit that will hook to the new livorsi trim electric LED indicators, assembly always had hydraulic steering and the stock steering arm/fork has been removed, so you will have to have external hydraulic steering or replace the sheering arm...