ok do most of the SE guys run RH prop or LH ? off the front ? or off the flywheel...?........ i know its gotta b alot cheaper off the flywheel with a drive shaft....... DOES IT EVEN MATTER............? WHERES PAUL fc pilot.....

Ever have stuff fly apart because the balancer bolt was missing?

Brand new TCI Rattler harmonic balancer # 870004, BBC, internal balance, has been double-keyed (1/4" & 3/16"). Also included is a PTO for snout-driven applications such as v-drive circle boat, 1.375" diameter male output shaft, 32 spline. All parts are brand new (both components and the fastener...

Was hoping someone had one collecting dust I could get a deal on. My new motor is internally balanced....and my old one was external. I need a new felxplate too....but with freight I may be better off just buying a new one here.

I have gen 6 502 and the balancer has 2 marks there is a lot of paint on it and I cant see the numbers on it. now looking at the front of the engine, the engine rotates clockwise and the balancer has has 2 lines on it. Is the first mark TDC ? What is the second mark?

Can you buy a harmonic dampener , I would guess of steel versus cast construction and at least 1/4 key way that allows solid driveline adapter to bolt up to. Must be available since there alot of PS Ks running this solid driveline and I would hope that they run harmonics.

Just throwing a winter time idea out there. Have a hydro that pushes the nose down pretty hard on the starboard side when getting into it. Right now it’s set up so the v drive is driven off the flywheel so the torque of the motor is spinning that way. How much will torque from the motor upset...

427 chevy flywheel and balancer in excellent condition $100 plus shipping

Anyone know anything about Powerbond balancers from down under? They show a SFI 8" Bbc model. Claim made in Oz. They go for 200 bucks +/- Need a reasonably priced balancer for a external balance 460 lake motor. :bangmyhead: 6000 rpm max-Any suggestions? No Chinese Junk Thank You! :))ThumbsDwn

So how does this happen to the so called "All Steel Balancer"? From what I have read it seems like it's a quality balancer for Superchargers. However, elastomer is coming out the back side of the balancer. The balancer came off of a 950 HP engine with a TBS 871 running 6.5 lbs of boost. Is...

rattler harmoic balancer wanted to change out my balancer on bbc could you tell me if its worth the money or is it all bull it is pricey,Thanks for any info.Rich

Need help identifying SFI 18.1, chrome, no weight on back, seems to fit chev bbc crank, no manuf. name, only #'s are A424848 0608 , I believe it to be a 396/427 chev. int balance harmonic balancer, any help is appreciated

I have a 454 harmonic balancer and a Melling HighVolume oil pump for sale. not sure what to ask so just make an offer.

Need some help...Im puttin her back together after a jet drive rebuild (thanks to Tom at JBP)and installing a new starter ring on the flywheel. I had previously removed this balancer to check for damage as I suspected it had gone bad when the crank pulley sheared off last season, and the boat...

Double keyed for externally balanced bbc New in box $215 Shipped

ATI Damper Harmonic Balancer, Super Damper, External Balance, Steel, Black, Oldsmobile V8, 307-455, V8. $200.00 These Super Damper standard harmonic balancers from ATI are specifically designed for high-rpm engines. Their proven elastomer is designed and tuned to eliminate harmful crankshaft...

I need a BBC aluminium flywheel (internal balanced) and a harmonic dampner (internal balance).

wanted bbc ati internal balancer

Is there a steel 2 keyway blower balancer available that is drilled both for factory 3-bolt pulley and 6-bolt Gilmer supercharger drive for externally balanced BBC MK IV cranks? Internally balanced is easy to find.

This will make a 605ci BBC with a 10.2 block Crank is 4340 Scat 4.500stroke 10.10 Rods are 4340 Scat H-Beam rods with ARP2000 bolts Pistons are JE 14:1cr With Balancer Price is $995 plus shipping Keith 903.742.1178