Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 326 Results
  1. Boat Classifieds
    Blown 454, casale v-drive with whirlaway, comp tandem axle, too much to list so contact me. Boat hasn't been in the water for 20 yrs, motor is started every other year, motor turned by hand once a month. Always covered. Great/easy winter go through, and be ready in the spring. Will sell minus...
    $15,000 USD
  2. General Performance Boats Discussions
    Hello All, Looking for some initial feedback on my new to me Hallett. I grew up with a 1976 Hallett going to Havasu, Nacimiento, and other throughout the southwest, and now finally have my own. My problem is, I purchased the boat from the brother of the guy who built it, and neither he nor I...
  3. New Member Introductions
    Greetings all! Just picked up a 1986 Hallett 21' Daycruiser with a hell of an engine in it. My problem is that I bought it off the brother of the guy who built it here in SoCAL and he had no idea what his brother had built into the engine. So, now I've got to figure out what I've got, and need...
  4. GN7 On the Dyno
    Have a motor build almost done. Going into a 25 ft Eliminator. Should scoot pretty good 572 with 1471 blower and superchiller. Big Brodix heads with new T&T shaft rockers.
  5. Boat Parts Classifieds
    I bought a 24 eliminator daytona from a deceased friend of mine's estate auction and this is the engine that was in the boat when two years ago i installed a 548 turbocharged engine. This 502 engine was running right at 100 mph on pump gas in that boat. I didnt really know what kind of shape...
  6. Boat Parts Classifieds
    Looking for a timing cover that is drilled and tappet on the side for blower pulleys.
  7. Boat Parts Classifieds
    Professionally built by Ron Deems, all new parts never fired. JE Pistons Scat Rods 427 Forged Crank Crower Rockers,Cam, Springs and Roller Lifters Dart Pro 1 Heads Demon Carbs Blower Shop 8-71 setup Milodon Pan MSD Dist and Wires Contact: Jeff Diehl jeffdiehlracing@gmail.com Serious buyers only...
  8. Boat Parts Classifieds
    If anyone has something sitting in their shop let me know..BBC Thanks, Matt
  9. Boat Classifieds
    1979 Hondo blown gas hydro,581ci dart block,dart pro1 heads,cp pistons,blower shop 871 blower and intercooler, Lenco 2speed airshift trans,30/60 split,1 1/8" propshaft,outboard steering,this boat was put togeter by Norm Grimes,at Norm Grimes racing ran and tuned on his dyno putting out north of...
  10. Boat Classifieds
    Boat is in almost perfect condition. Motor is brand new. Mahogany wood deck. Not a drag boat but originally a circle boat design. Never raced. Built by Rudy Ramos. Two owner boat been indoors its whole life. in shreveport, louisiana 318-820-6969 $39,000.
  11. Boat Classifieds
    Selling off our race boat starting a new project! Blown 496 BBC 250 b&m 7lbs all day, just a fun RR boat has a lot more in it for moving up a class or 2! Has always been updated for ADBA & Lucas so goes through TECH in a snap! Selling the whole set up as TURNKEY ONLY WILL NOT SEPARATE. 1. 10x20...
  12. Boat Parts Classifieds
    Dart Block Chevy 522 Cu. in 6.535 Rods H Beam Ross Pistons-HD Pins 9.5 comp 4.560 Core 1/16-1/16-3/16 rings Brodix 2x cyl Heads Jesell Rockers 1.7 ratio Jesell Belt Drive 4" crank 434D Crane HD Roller Lifters Billit Roller cam Avid oil pan 671 Blower Approx HP alcohol 1500+ gas...
  13. Boat Parts Classifieds
    Blown injected on Alcohol - 496 BBC chevy tall deckblock half filled-4.250 valasco crank- oliver billet main caps-groden aluminum rods-ross pistons-total seal gapless rings-isky 802 lift cam-comp cam roller lifters and push rods- stainless steel comp rocker-crane stud girdles-merlin grumpy...
  14. Boat Parts Classifieds
    Posting for my friend Brian who has decided to sell the engine I built for his Southwind Tunnel Dragster, but can't seem to get logged back onto PB. It was put together using all good parts,Dart block, Callies crankshaft, Oliver rods, JE pistons and rings, Clevite H bearings. Heads are the...
  15. Boat Parts Classifieds
    je 11.5-1 compression pistons with 1.257 compression height. Uses ***** style rings. Pins are hd .250 wall taper wall and 1.094 od. Bore is 4.5. This is a set of 10 pistons and pins. Uses pin buttons . These cost $1700. Not going to use them now so asking $850 in shreveport...
  16. GN7 On the Dyno
    New years resolution ............................ build it!
  17. Boat Parts Classifieds
    This is a set of 10 pistons with 10 heavy duty taper wall 1.094 wrist pins, with 20 wrist pin buttons. For a 4.5 bore, 1.257 comp height. Sell for $1870. Pistons use ***** ring set. For 24 degree conventional bbc heads. 11.5-1 with 119 cc chamber. $975.00 In shreveport, louisiana...
  18. GN7 On the Dyno
    If for example , 555 Blown @ 4psi I'm spinning a Dominator SS A with inducer and stuffer plate to 6800/6900 on the impeller chart this supposedly puts me at 1150-1200hp Now if I was to just run a single Carb (1250cfm ) ....what would the expected HP be ?
  19. Boat Classifieds
    X - Drag boat, single seater, BBC, 871 blower, berkley pump, stainless steel impeller, 15K or best offer. 909-520-3581
  20. Boat Classifieds
    This boat is a refurbished former competition hydro. It has been completely sanded, prepared and painted with the engine removed. The trailer was also redone with new axles, classic Cragar wheels, new tiger paw tires, lights, etc. The dash was fabricated of aluminum as was the splash shield and...
1-20 of 326 Results
Top