Performance Boats Forum banner

bracket

  1. Parts for Sale
    New Engine Mount Bracket & Engine Mount Base, BBC Chevy $200.00 PAIR BEST TO SEND MESSAGE OR TEXT ME SIX18-567-180FOUR
  2. PB Open Water
    Anyone using the IMCO Alternator/Power Steering relocation bracket on their 454. I think i might need to buy one (not sure which one) to use on my Twin Turbo Setup i am installing on my engine. If any of you have pictures of your engine using one of these brackets (there are two different...
  3. Jet Boats
    Looking to find what throttle cable bracket to get for my push style pedal / cable setup. Going from a stock BBC intake and Edelbrock carb to a Edelbrock Victor Jr. with a Holley 850. Attached are pics of the existing bracket which is clearly not tall enough once I attach the linkage to the top...
  4. Parts for Sale
    Glenwood, cast aluminum, rudder post bracket. The post bracket and L-brackets were polished and sent to Extreme Performance Heat Coatings and clear ceramic coated. They were never put in the boat. Dave, at Connolly Marine, has made a custom bracket and I don't need this one anymore. $125.00 obo...
  5. Jet Boats
    D21 Enterprises universal alternator bracket and alternator kit. While rigging the last few boats, I found it difficult to purchase a universal alternator bracket to fit our style of motor plates. I kept the design of this bracket without mounting holes, so you could flip it in any direction and...
  6. V-Drives
    D21 Enterprises universal alternator bracket and alternator kit. While rigging the last few boats, I found it difficult to purchase a universal alternator bracket to fit our style of motor plates. I kept the design of this bracket without mounting holes, so you could flip it in any direction and...
  7. Parts for Sale
    Complete set up with two fiberglass buckets (covered with ugly covers), aluminum bracket that has a battery switch and ignition/start switch. Also has an Autometer mech oil gauge with oil line and an battery that I believe is an Odyssey with cables.. Stringer spacing was 26 inches, but...
  8. Parts for Sale
    Worked when I pulled it off Roseville $300
  9. Parts for Sale
    Looking for the aluminum bracket that holds the forward and reverse handle on a Sanger jet boat. Let me know what you have. Thanks
  10. Jet Boats
    I must be mission something or I have the wrong bracket. There are two main issues: 1. The bracket does not line up with the carb linkage. The angle of the cable is too much, It may work but I don't like having the throttle cable angle that drastic. 2. It hits the front accelerator pump. I can...
  11. Parts for Sale
    This is a like new CP Performance alt/power steering bracket. I will also include idler bracket. Both are powder coated 125.00 plus shipping. call Sean for more information 661-510-5651
  12. Jet Boats
    Need to know the distance between the two holes and Dia of bolt to use on the Autometer 5" Tach pedestal column mount I have one on order but need it sooner to have it drilled and tapped. Thanks
  13. V-Drives
    I looked on the website for the rules for all the bracket classes and I did not see anything about engine displacement. I saw fuel rules,etc but nothing on engine restrictions. Is it like LODBRS as you can run whatever just as long as you don't go over your bracket? Any info would be great...
  14. Parts for Sale
    Stacker tank bracket, fit's the 2X7 gal. setup. Waterjet cut, polished and Nantech coated. Openings are 8.5", 22.5" wide and 24 7/8" tall. $125.00 plus the ride.
  15. Parts for Sale
    Looking for bracket to hold shifter on Sanger Pickle fork jet boat. Send me some pics of what you have. Thanks
  16. Parts for Sale
    Looking for a complete ready to bolt in 10* casale that won't cost me my right but.
  17. Parts for Sale
    Looking for gas tank bracket for 21 eliminator Daytona 23 gallon tanks mine broke. Can anybody help.
  18. Parts for Sale
    Lightly used, bracket anodizing is not faded this is for the 7 series msd box but not the digital 7, $100 plus shipping or will bring to NJBA races located in Norcal
  19. Parts for Sale
    Selling NOS Support bracket. Black anodized. Came out of a jet boat. Fits between the stringers and it is 26 inches across Excellent condition! Asking for $125.00 plus shipping or can bring to races and Wild Horse Pass Thanks for looking:flowerysmileqh2:
  20. Parts for Sale
    Im looking for a 455 dipstick tube with the bracket to mount to the exhaust. Or just the bracket if anyone has one. I can make one if it comes down to it but I was hoping not to. Let me know what you guys have. Thanks in advance, Nate
Top