breather

Valve cover breather tank with brackets and if you have a set of burn downs

Nice imco breather, new $150 See pics Dave 909-821-2808

I' m looking for a decent looking breather vent tank that can bolt on the back of a blower. If you have one to sell please let me know via PM. Thanks

Venting back into the air cleaner...is this needed for vaccume or can I get rid of these and go with a standard breather filter on valve cover?

Got some new to me breathers. Whats the best way to keep from leaking? Use a gasket(what type) or just use some Right-Stuff and bolt down? Or Both? Thanks for any help. Johnf

I just replaced the oil pump on my BBC because the spring broke decreasing pressure...I have roller rockers & stud girdle but no deflector plates in the cast aluminum valve covers. At higher rpm, over 3500 & up I'm getting oil out the breather with a new working PCV & breather...my question is I...

Cleaning out the shed came across this old breather. The other one is around some where. Thought you guys might enjoy. sorry pic rotated

Well I just bolted on my new set of stainless valve covers. They look too good to drill holes in. I know I have to. But I would like to order breathers ASAP just don't know what style to use. Would like something that looks half decent

Good condition Has to filters. Dual threaded inlets SOLD PM Me for paypal Shipped

Can I put breathers on both valve covers or do I need a PCV valve setup on my bbf.

460 Ford running 5qts 10W30 and a quart of Lucas oil stabilizer. First I was using a built in pcv breather with a hose running to the back of the carb. Cruzing at 60 with the engine reving at 3,000 the crank case pressure would build up and blow it out of the gromet. The dip stick would pop out...

do the boats with ott headers that have a port in the collector for a breather that goes to the valve cover on each side, have a water blocker somewhere in line, or are they dry headers?

Need to put a tank and breathers on my motor and looking for some ideals.

$ 10

Puke Tank for sale. Polished aluminum. Brackets are integral to the tank, but the mounting plate is bolted on. Plate fits Chevy bellhousing bolt pattern. Includes two 90 degree -16 AN fittings. $150 + $20 shipping. E-mail [email protected]

I decided to take my edebrock elite breathers off yesterday and clean the foam. Except the foam turned to dust :) I am running turbos, so I would love the tall breathers, but it isn't going to happen right now I think. (or a puke tank, but I flat out don't know where I would put it) So what...

Anyone running the CP extreme valve covers for BBC and the tall breathers CP sells for these? Do you have a proven spot to place these...obviously it will be up front. Gonna to machine them soon. Thanks in advance

Junking my vac pump and running hoses from the valve covers to the exhaust, but having a hard time finding the right check valves at the auto parts store to thread to the new inlets on the exhaust tips... Any info greatly appreciated!! Long Beach is only a few days away! Thanks, Mike PS108

okay fellas help us out here or give us some options:)bulb my brothers motor in his tx is giving us fits and we are sick of it:|err here is a run down.468bbc he pulled a top ring land off of a kb piston several months ago,#4 cylinder leaned way out.so he bought a set of trw forged pistons and...