Performance Boats Forum banner
1-15 of 24 Results
  1. NorCal
    Just picked up a 21 Hallett SS open bow that is really nice but the trailer is totally rusted out. I contacted VM trailers but have not heard back. Any other ideas before I have to go back to socal for a trailer. thanks
  2. Jet Boats
    looking to see if anyone can help me find new builders . Tunnels/gullwing/vee bottoms .is there anyone with the molds still I know bill was with cp how about roush or any others any information will help thank you .
  3. Jet Boats
    I have a 460 getting a set of .040 over h535cp pistons. Box says minimum clearance is .0015 Should I run a .0025 or .0030 clearance or??? This is for a 450ish hp bbf in an 18' Taylor with a JE pump and aluminum impeller, thru transom log manifolds.
  4. PB Open Water
    I am in the market to build a pool at our Havasu house. We want a custom in ground pool with a jacuzzi. I have seen 3 different builders in our neighborhood in the last 9 months or so, 1) Edgewater 2) Mohave County 3) Sand Castle. Has anybody on this site used any of these 3 builders before? Is...
  5. Jet Boats
    If you had the means and desire to start a new build, who would you select to build you a brand new engine for your boat? What kind of set up would you want, what would be your performance goals, what type of boat would it be ran in, and why would you want this particular person to build your...
  6. PB Open Water
    Who can build and install a bimini top in Blythe? I have a DCB Mach22 and would like to get the fastback style bimini made for it. Let me know if you have any suggestions.
  7. GN7 On the Dyno
    Throwing this out to anyone who has experience with Marine SB Chevy builders. Old engine is DUN, so I'm looking for recommendations for engine builders that build a good Big ci small blocks that would run well in a jet. Nothing smaller than 383, perfer something a little larger based on a 2 part...
  8. PB Open Water
    OK so we having a pool built. Originally wanted a fiberglass, but the yard is to small for their big ones and to big for their small ones. So i narrowed it down to two pool companies. I need some feed back on people who have used them. My number one choice right now is Sand Castle pools, and...
  9. PB Open Water
    Like a referral from someone that had one put in at there house and were happy with end results. Thanks Jeff
  10. V-Drives
    I'm sure everyone here knows I want to trade my chopper project for a flat bottom v drive boat. Now, I already have an old hull that was my dads. I would not be opposed to trading my chopper for a resto on that boat. It would need to be a sound boat and turnkey for this trade to happen. I'm not...
  11. Parts for Sale
    Hello all I am looking for a set of saddle tanks for a jet boat, let me know what ya got. Also I would be interested in having a set built if the price was right, who out there can build a set of custom tanks?
  12. PB Open Water
    Just looking into building a shop in Havasu, Metal or Wood, looking for competitive and reliable builders in the area. I want to do it once the right way and not get hosed in the process. Any recommendations from you all would be a great help. Thanks
  13. PB Open Water
    Anyone on the boards a pool/spa builder around Corona? I even need some ideas as I am not very imaginative,,:)sphss,but I know what I want. Rio
  14. PB Open Water
    I'm not trying to start or spread any rumors, but is anybody building any new boats. In my business I drive past a few builders, shockwave-lavey craft-caliber one-ultra. I don't see anyone building anything, I mean at 4:30 this afternoon Lavey Craft was locked up as tight as a drum. I can't help...
  15. West Coast - North
    Will it ever end? Just think 1st it was Olympic and now Meridian Yachts on the big boy side, both Closing their doors. Now I hear Cope & McPhetres-Seattle/Woodenville and PowerBoats NW are both going under. Key Bank has stopped its Marine/RV Lending. I'm sure there will be/are more. Who is next...
1-15 of 24 Results