have the Endrele 80A pump with fuel cut off valve and bypass valve.. Pump is in excellent shape and looks to be new-ish.. everything in pic is included for 300.00 plus shipping.. located in Sacramento , Ca. area.. 530-333-1047 Bill
On the crackerbox we run a force fed pick up system.
There are times that we need to idle back to the launch ramp. I want to keep the force fed deal going, but want to add a electic waterpump to turn on when we need to idle.
Anyone have any setup ideas as to how to plumb a bypass and...
about to start up my engine refresh and wonder what filters would be good. i hear stay away from fram.
i want a non bypass filter and usually get the largest one i can find. i have a remote filter so space isnt an issue.
my previous filter was a Napa gold 1773. napa is preferred as i have a...
Im revamping my fuel sys. this winter
what im looking for is an inline fuel pressure reg. 7/8psi that i have seen on some blower motor gas and alke
it looks like a brass inline fitting non adj.
from what i have seen it's eather a idle or hi speed bypass :confused:
what im trying to do is...
The wiring for the senders were shot in my boat. Last season, I had a shop do some work on my boat, so I wanted the senders replaced while the drive (Older Alpha) was out anyway. The tech was not able to remove some part of the senders, so he left it like that and put it back together :mad: ...
On my last engine, I ran a 51060R wix filter, Full Flow without an internal bypass.
And the filter housing bypass was plugged.
It filtered 100% of the oil to the engine. Correct?
Keep in mind this was on a jet boat , never operated in cold weather.
After three seasons running hard with a...
I have a Dan Olsen block mounted cooler and remote oil filter. From what I understand, this means there is no block bypass, and since the WIX does not have a bypass, could be trouble.
I was going to try the Wix at Parker, then got cold feet when this issue was brought up.
Ps. We noticed that...