Motor is currently 18" from back of block to inside transom . Moving it forward to get 28-30" per Gregs advice. ( approx 1 foot ), Installing longer Stringer motor Rails ( I'd like to be able to just line up new rails where old ones were and re drill new holes in the angle , using existing...

I realized that the BA deal was more work than I wanted to deal with ... Also I'd like a little lake use out of my motor so .... I'm changing things up and plan to be back on the water this season !

I have a 1996 carb'd Mercruiser 454 in a Warlock that I'd like to change the oil myself and save a few bucks. In the past, whenever the boat needed to go into the shop for something else, I'd just have it changed at the same time. Currently, I don't need to take it in for anything but it's due...

How often should the drive oil be changed? I was told it should be changed every 50 hours.

How do I tell the angle of the box?

Can the back seats be changed out to a forward facing bench seat on this boat? (18 foot 1971 Tahiti) If so where can I get this done in Vegas? I am worried about my kids falling into the engine :/ Thanks

How hard is it to change a whirl-away from rh to lh? Can the dogs be simply flipped? Not sure I want to just tear it apart to look as the wife's Litchfield will need one sooner or later if it's too much trouble to change the direction.

whats up fellas. im really thinking about changing a few parts myself before i take my boat back down to elsinore for its final touches. i gotta change the mechanical fuel pump (looks kind of easy), install the oil pressure sending unit (looks real easy), and replace the oil filter (real easy)...

Hey guys, just curious how often you change the little fuel filters on the carburetor fuel lines? In replacing them are they just standardized or are there different filters for marine application carbs?? Thanks!

I was reading in another post about the spray liner for his boat and removing the carpet and it got me thinking.... What would I have to do to replace the carpet on my Bennington with a non-slick surface? I believe under my carpet is wood. Is it a matter of having someone shoot/apply...

???? on changing my Impeller I took the boat out this weekend & it ran a little warm so i assume its the impeller, so my ? is how hard is it to replace it, I have a 496HO w/a bravo 1 out drive!

well my old dell after 8 years, the hard drive died on me:mad:. question what do i have to do to change it? or should i just buy a new tower. how hard is it to change out the hard drive?

Hi guys. A friend of mine told me he heard that if you buy a boat with a name on it, its bad luck to change it. How many of you have heard this, and have any of you said "The heck with that, I'am changing it". I quess I do have a couple superstitious believes. Also any stories from the ones that...

Re Naming the boat BACK ON THE BOOZE

I know this has been answered before, but what can I expect to gain or lose by changing from a "B" impeller to a "A" impeller. Do I gain holeshot with an a and lose top end mph? I know alot of factors need to be figured in.

i have a 1992 escort with a 1.9 and auto. what happens when you go from a 13' rim to a 14" will it make much of a difference on how it runs ie: power and speedo.

what I found behind the glove box(:)eek(:) . . . . . . . . . . . . . . . and it's a real TG&Y notepad too:)sphss

Just wanted to give everyone an update on Kyla, the teenage girl that was hurt in the accident last Father's Day. She came out with her family yesterday for the second time since the accident. The first was last August, a bunch of us got together and had a BBQ for her. It was very difficult...