Performance Boats Forum banner

cnc

  1. GN7 On the Dyno
    We have our final CNC version; AFR casting set up as nitrous head, 351cc (right port), 3.48 min cross section, 2.375 / 1.85 valve, 116 cc chamber, 50* valve job, alloy seats, steel ex guides w/ liners, 460 cfm int, 340cfm ex on 4.60 bore. This set is for Troy LaCrone's new all aluminum 582 ci BB...
  2. Other Stuff for Sale
    BOBCAD CNC COMPLETE SOFTWARE WITH DONGLE AND ALL DISCS AND POST PROCESSOR LIBRARY,MILL ,LATHE AND ART WORK CUTTING,TEN DISC SCHOOLING.VERSION V-23 $2000.00 open for trades 928 566 4104 new price 4-19-17 500.00
  3. GN7 On the Dyno
  4. Parts for Sale
    Just throwing a feeler out there for anyone that might be interested in these, don't have to sell these but also don't have a need for these at the moment. One head is new from Dart and the other is in good useable condition. The used head has been angle milled and the chamber is now 106cc and...
  5. GN7 On the Dyno
    I had my heads cleaned up about .003" and I am trying to find out how much that has changed the cc's so I can figure out the compression. The head's are Dart Aluminum 355 CNC Heads 121 cc
  6. Parts for Sale
    AFR 357cc Fully CNCPorted "Magnum" BBC Cylinder HeadsBrand new BBC AFR 357cc cnc ported heads. These heads arenew and still have the quality control approved stickers on them. $2500 If youhave any questions please feel free to give me a call. Thanks, Kenneth (714)943-6353
  7. Parts for Sale
    CNC Machine Shop--->we will make your custom parts for your off season boat upgrade! Hey guys, I own a small Automotive Repair and CNC Machine Shop in Tucson, AZ and it’s a pretty multifaceted little operation. We offer Automotive Repair, complete Auto and Marine Engine Builds along with...
  8. Parts for Sale
    CNC Machine Shop--->we will make your custom parts for your off season boat upgrade! Hey guys, I own a small Automotive Repair and CNC Machine Shop in Tucson, AZ and it’s a pretty multifaceted little operation. We offer Automotive Repair, complete Auto and Marine Engine Builds along with...
  9. Propellers
    For sale 1 each RH Mercury CNC 5 Blade 39 Pitch, 16.5 diameter, 18 Rake CNC prop for Mercury #6/8 drive. Excellent condition. $1500 firm
  10. GN7 On the Dyno
    I had a customer send me a pair of virtually stock Dart 355CNC heads that we both agreed are too big for his combination, but he wanted to see if there was something I could do to make them better, without making them bigger. These heads are already really good from Dart. This pair had been run...
  11. Parts for Sale
    see pic...have some slight angle but could be milled totally flat..right at 4" each two to choose from or buy them both!! $110 each 859-393-3410
  12. NorCal
    i need some custom gauge bezels made to adapt some new gauges into my scarab 22. ive got all the CAD work done, just need a cnc to plug everything into... prefer aluminum, need 2 made. these are somewhat small pieces with a max diameter of 4-3/4". or if you know what direction to point me in...
  13. GN7 On the Dyno
    http://www.carcraft.com/projectbuild/ccrp_0703_more_horsepower_for_less/index.html I have a 496 now (63 Nova) and thinking of doing this same build. Basically heads and cam change. What increase in HP TQ would there be going to the 315 CNC heads? Jim
  14. PB Open Water
    I am looking to have two 4x8 sheets of expanded plastic routed with a "groove" design on them. Does anyone know of a person or company they can recomend? Thanks in advance for your help! Jay
  15. Parts for Sale
    I have a brand new, never used, Edelbrock Victor 454-R, CNC series intake manifold for a rectangle port, standard deck BBC to fit a 4500 Series Dominator. It was CNC'ed by Wilson Manifolds and has their embosed signiture. Summit # EDL-2807 sells for $591.95 The first $450 plus shipping gets it.
  16. Parts for Sale
    I got a set of AFR CNC ported 315 heads for sale..Going anoher way with my build and dont need anymore 1000 bucks:)devil 909 459 9647...
Top