Performance Boats Forum banner

cooled

  1. V-Drives
    looking for water cooled elbows, 4 bolt , 3" I.D. x 4 7/8" O.D. aprox. 35° down :)hand thanks !
  2. Parts for Sale
    Just rebuilt last August. Sonic cleaned, log to snail surfaces milled and stainless hardware/gaskets replaced, snail ends cut off to open to 3.5". Need to be polished. $200 pick up only
  3. Parts for Sale
    Looking for a good used set of Brummett Marine/ Gentry water cooled turbine housings for a twin turbo setup. Let me know what you've got. Thanks, Gary
  4. Parts for Sale
    Looking for either a left hand, or possibly full set of the Banks/Aero Marine/Glenwood/Hardin style exhaust logs, with the water cooled exhaust flange. Friend has one leaking that needs replacement. Thanks
  5. Parts for Sale
    Complete Procharger M-3CS Inter cooled Kit 40 to 60 % gains on pump gas on Mercury 502EFI Asking $4k located in California can provide pics and any other info for serious buyers.
  6. V-Drives
    Have a Hal craft water cooled V-drive,small block Chevy with a neovane pump.What is the proper way to plump this set up to cool the v drive.Thanks JOHN SR
  7. Parts for Sale
    needing some Water cooled turbo heat sheilds
  8. V-Drives
    Does a split case Casale in a 19' flatbottom ski/lake boat need to be water cooled? I would assume yes, but I have been told it is not necessary. My only hesitation is that there is not currently a water pickup or dump for this (translated - 2 more holes in the boat). Thoughts? Thanks
  9. V-Drives
    Working on converting a 1989 Supra Pirata "roll bar boat" with PCM 454/BW 72C into a v drive. The gear box itself will be under the carpeted floorboards. Due to lack of air circulation, should I get a v drive that is water cooled? I can get a nice Crusader unit for 200.00 that is water cooled...
  10. Parts for Sale
    Alum. over transom water cooled pipes for a flatty, nice condition, $200.00 Jim 1818-890-1867
  11. Parts for Sale
    Water cooled turbo heat sheilds, $200.00 plus ride, currently located in Norwealk, California
  12. V-Drives
    I am building a sanger flat for my son and it has a thoroughbred v drive that does not have the ability to have water put to it. He will most likely only run around the lake for maybe a 1/2 hour to 45 min at a time...Any thoughts as far as not having a cooled vdrive.Thanks for your time guys.
  13. PB Open Water
    So i run a jet so i know how that is cooled. I know how a outboard is cooled. But how is a traditional I/O or V drive cooled? Do they ahve a traditional water pump or whats up? thanks!
  14. V-Drives
    My boat will be used only for circle racing. Chevy 350 with 10* casale 1.12 gears. It doesn't make sense to me to come off the motor and run hot water to the drive. Is this thing (the v-drive) really going to get that hot in 10 miles of running (assuming warm up laps, race, and cool down laps...
  15. Parts for Sale
    Wanted 35° water cooled elbows 3" hole size 4-7/8" flange, 3-1/2" hose,
Top