coupler

Looking for a 1 1/4" x 7/8" coupler. Any info would be greatly appreciated. Thank You

coupler and bell housing are originial equipment item. Flywheel is excellent shape aluminum. coupler is $300 bell housing is $300 aluminum flywheel is $200 in shreveport, louisiana 318-687-9088 or 318-470-1482

still in great condition located so cal 661-904-5918 200$ plus shippping

Looking for a 1-1/8" (both ends) propshaft to v-drive coupler. Needs to be a 5 or 6 bolt style, steel or aluminum ok. Jocko

I am working on my 28 Daytona. I greased the drive coupler hoping it would quite a noise back there first time out this year. I had replaced the gimbal last year so I figured it was ok. After the noise persisted I pulled the drive and found the gimbal bellows had some water in it and the...

I am working on my 28 Daytona. I greased the drive coupler hoping it would quite a noise back there first time out this year. I had replaced the gimbal last year so I figured it was ok. after the noise persisted I pulled the drive and found the gimbal bellows had some water in it and the...

lookin for 2 male greek couplers 32 or 16 spline. and 16 spline coupler with bolt going in the center of it thanx Gerry

PTO IS SOLD Ford 429 460 PTO, bolts to flywheel or flexplate, accepts 1350 U-joint flange. These retail for about $90 brand new. $55 for this one. PTO IS SOLD

Lenco solid driveline coupler for sale. 4" length 16 spline. $140.00 plus shipping over $200.00 new

Just checking to see if someone had such an item before I call Bergeron tomorrow.

Hi, Mr. Newtothis here..... Putting a solid roller cam into a 496 BBC build. How do you set/keep the cam from walking out the front? I have a Nicson pump plate and mount. Is it as simple as using the pump housing and coupler as the keeper or is there more to it? There is a also mystery 5th...

Good Sunday Morning :)coffee, I'll be finishing up my first supercharged long block soon and I'm getting into the boat parts for it now. Learning as I go, new to the flats also so you know where I'm at. Project came with most everything (sans motor) but I just realized there is a coupler...

I have a HP Bravo engine couple for sale. Excellent condition, $250.00 obo + shipping. Call or Text 714.317.9607

Does anyone have a V-Drive input shaft coupler for a 32 spline shaft laying around ? Thanks, JT

MY ALGON PROP RELEASE WENT OUT I GOT ANOTHER 1 THAT HAS STRIPPED BOLTS THAT WAS GIVEN TO ME AND IS FROZEN SO IM GONNA TAKE BOTH OVER TO STEVEO THIS WEEK...BUT I WANTED TO TAKE THE HYDRO OUT THURS MORN.. SO I NEED A OLD 1" COUPLER NOTHING FANCY.....OLD 4 BOLT IS FINE ..CASH IN HAND:duh:

any body have a pic of witch way it goes on the pump shaft oh solid drive line thanks

16 spline coupler for shaft to v drive $70 plus shipping

Aluminum or steel? Have been seeing a few guys running the aluminum couplers, and they look bitchin, after reading a little bit Bout them the aluminum ones are almost a 1"1/4 longer than the steel, still with 6 bolts but just a bit longer, I know hp comes into to play, my motor alone makes a...

my biesemeyer has a driveshaft with ujoints but no slip yoke, has a hub to replace the balancer, pretty much simple as can be. problem is i have two engines for the boat and would like to be able to swap relatively quick. first engine is an internal balanced 475" tunnel ram engine, no issues...

Looking for a coupler 6 bolt want either stainless or chrome .. Needs to be 1 inch on one side and 1 1/8th on other side.. Preferably stainless but chrome next choice.. Let me know what you have.. 530-333-1047 bill or cell 530-903-1623. Also looking for 1 1/8th safety collars (2) qty.. Polished...