Crank has center counterweights, gun drilled mains and knife edged. 2 piece rear main seal. Has never been in a motor or any holes drilled in it. It is over $1900 at jegs and summit racing. 2 piece rear main seal. $1575
shreveport, louisiana 318-687-9088 or 318-470-1482
OEM one piece rear forged crank was just balanced and magnifuxed and ran less than an hour. Tore the motor down for a different reason and decided to stroke it. .10 under on the rod journals. The casting number is 14097044.
Do a search for it and you can see the details. Perfect condition.
OEM one piece rear forged crank was just balanced and magnifuxed and ran less than an hour. Tore the motor down for a different reason and decided to stroke it. .10 under on the rod journals.
The casting number is 14097044.
Do a search for it and you can see the details. Perfect...
Heads have 2.250 1.880 valves and have been reworked with bronze guides. Springs etc are for a hydraulic or flat tappet cam.
Head casting number is 14096188- $500--sold
crankshaft is perfect standard- $300
3- 781 large oval port heads- $200 for all three
in shreveport, louisiana...
4 inch stroke callies stealth crank standard rods and mains,callies said it's good for over 2000 HP it's dual keyed bob weight is 2244 I have had it over 12 years and never used it the person I got it from used it in a bracket motor with no power adders I'm going through my stuff and getting rid...
selling a LA ent billit en30b crank balanced at 2850. crank is 20/20 but is going out for hard chrome and grind back to std. application is late model 426 ci with 4.5 stroke. $2000 call bugsy at 714 305 1833
GM 502 Crankshaft. 2007 year of production
This forged steel crank shaft (forging ID #14097044) is designed for use in the 502 cid (8.2-liter) big-block V8. It is a Gen. V & Gen VI design with a one-piece rear main seal. It is externally balanced, nitriated and cross drilled.
The 168 tooth...
1) Six JE 4.500 pistons, part # - 258238, 14.2 compression W/118 cc head(roughly) - 100.00, Cast 4.00 crank W/balancer, standard bearing size - 50.00.Pistons have three to four hours run time on them, prices do not include shipping from 92555.
Sonny Bryant lightweight billet 3.980" stroke crank for a BBC. Rod journals are Honda size (1.887") with standard mains. It has been knife-edged and checked by Marine Crankshaft. $550 + shipping
I also have a fresh 433" BBC short block. It is a 427" + .030", 4 bolt mains, Mahle 12.5 pistons...
Putting feelers out to see if any one might have a good used 4.250 crank, for a big chevy.
Kind of on a budget, the reason i am looking for a nice used one, or if sny one has leads to a reasonable deal on rotating assemblies.
Just trying to get my motor back together before the season starts !