Looking for a BBC dip stick that the knob/handle is the stopper (or screws in)into the oil pan I've seen them on other boats but when I ask where they got them everyone says it came with the boat so some one out here has to know where to get them or fab one up for me.Thanks

I am looking for and aftermarket dipstick similar to a LoKar shorty dipstick that will fir a Velvet Drive transmission with a 5/8" opening in the case. LoKar only makes 3/4" dipsticks. Anyone know of a product that might work? Thanks, Steve

I have a set of four DIP D25 Phantom 24"x9.5" wheels with Continental 315/35ZR24 tires with only about 800 miles on the tires. Asking $1600 for the set. The wheels and tires are located in Kelseyville Calif. The wheels and tires came off of my 2006 Dodge Ram SRT-10 with the 5 x 5.5 lug pattern.

I have a set of four DIP D25 Phantom 24"x9.5" wheels with Continental 315/35ZR24 tires with only about 800 miles on the tires. Asking $1600 for the set. The wheels and tires are located in Kelseyville. The wheels and tires came off of my 2006 Dodge Ram SRT-10 with the 5 x 5.5 lug pattern. Here...

Just bought a Chris Craft xk19 and right in front of the windshield on the stbd side there is a major dip in the fiberglass like there was something sitting on it for years. I will take a pic and send it in a bit, but does something like that sound fixable? Theres actually 2 but the other is...

How are you guys securing yous dipsticks? I bought one online 455 olds specific, Theres a lot of resistance when pulling out and putting in the dipstick, If I dont hold the mounting base while pulling the stick out it will pull the whole think out, when is a pain in the ass to line up and get...

after running the boat for a while oil comes up from the dip stick .what could it be???its been doing this since i bought it its just a mess at the end of the day. 460 milled heads .baby cam..what could it be??

:D seriously I need to braze it up. Does anyone think the oil will catch on fire with in the motor if I try to do it on the motor or should I take it off the motor? I`m planning on taking it off but just in case I can be lazy I figured I would ask? its a dooley steel pan if that...

It's amazing this place has managed to stay open for 100 years... I attribute that to the low quality food and that is absolutely reflected in their pricing and above all the majority of clientele. Sure you get those that are curious like I was to see what the fuss Huel Howser was talking...

I was just wondering what you do with the dipstickhole in your block since your dipstick on your v drive is in the pan. Do you just put a tube and dipstick on or is there a block off. Thanks.