drain

Hi Guys Any reason why I couldn't do the above? Certainly would make oil changes easier. Something small like a 1/4" npt magnet plug?

folks, i recently purchased a 2007 25 rage. My question to the forum, the on board inset cooler holder that sits in front of the pilots knees, can you continuously drain your cooler in this location? Where will the water go? Thanks for any feed back. JG

Other that cycling the outdrive up and down, how else do u get the water to drain. I must defeat those a-holes at the next quagga inspection

Whats everyones take on welding the weep holes closed on a set of headers that are heading to the Cerakote shop to get coated. They just dump water all over both sides of where I like to keep stuff dry i'm hauling around is the reason i'm considering this. If I didn't store stuff there i'd just...

does anyone know if the drain bolt on a milodon oil pan use's a gasket type or o-ring on the 12an drain bolt mine fell apart :( but it looks like a flatten o-ring and where can I get one ???

Just curious if anyone drains the water out of your block if you have aluminum heads? What about the dreaded electrolysis or corrosion? Would you drain the water every time or just in the off season?

Available on our Ebay store BoatLightsUS and on our website at Boatlightsus.com. Enter the coupon code “PB99” to receive $10 off your order. Introducing the new Max Beam Underwater Drain Plug Light from Boat Lights U.S. Our most powerful and brightest light yet! Features 400 Lumens and 6...

2" diameter with a 1/2" NPT plug. $15 Free Shipping. Paypal accepted.

How reliable are these one way flapper valve type bilge drain valves. It seems like a piece of debris might get cought in it causing it to leak. Any experiances positive or negative?

BBC oil pan with drain hose, dipstick and crank scavaging plate. $60 + shipping

New oil drain kit w/ metric threads (20.00)

Hi, question for those smart on basset headers please. The drain plug hole at the bottom, mid pipe, i just plugged it today. (this is unrelated to the main injection system, this is a hole half way down the main/upper pipe at 6:00 position) the main injection system does have an overboard drain...

On the Mercruiser Gen VI 496 MAG with closed loop cooling, there are four connectors (appear to be quick disconnect) fittings at the manifold on top, two on port and two on starboard (at the sea water and power steering pumps). Need to find out how to reconnect the air hoses. Are the connectors...

When I pulled my motor apart I had a good deal of electrolysis going on with my aluminum heads. It seems like some where I read most of that happens while the boat is sitting on the trailer. Seems the obvious thing would be to drain the block every time...???? Or would the block itself tend to...

I have a Milodon 10 qt jet pan that leaks at the drain plug. it came with a cheese O ring, that must have split at installition. anybody have this problem. or any ideas. the plug looks like a large (1"or so) anodised plug . maybe a AN plug? I'm thinking copper gasket, any ideas. thanks steve.

What is the torque for the drain plug on a 03 Duramax? I remember it was quite high. Thanks

I have a 2004 496 HO with the easy water drain system. The sytem no longer works when you pump it full of air and now the engine is blowing water out of the drain system valves when I am under way. I mean alot of water. Enough to sink the boat if it went unnoticed.The problem does not exist as...

On a cylinder head that has crappy drainback or if you just wanted to route the oil back to the pan through exterior lines where is a good place to dump it back into the pan? I see Schmitt is doing this on the engines with the heads I run and I see why. Its a win win situation. So I'm going to...

Im a newbie, currently restoring my first boat. I just noticed about a 1" hole on the outside bottom right corner of my berkley jet. Looks like some kind of drain, but I think it goes through the hull. Does it need a plug or what?

Do they make a drain plug for a BBF that has a valve that you can hook a rubber hose or something to, to drain the oil? I don't wanna have to hassle with a pump and all that stuff. Thanks