duratec

Duratec Vinylester Primer 1799-006 I'm getting ready to paint the bottom of my Sanger Bubble Deck. The boat was soda blasted by the previous owner. I have seen several recommendations from Offshore Ginger on this forum for Duratec 714-002 (white) and 707-082 (gray) polyester hi-build primer...

Material to reflo your floors-- Here's what you get: over 1/2 gallon of each duratrc high gloss additive clear gel coat activator (small bottle of this stuff--you don't use much) here's how it's done: scuff floor with 180 grit on your da degrease you mix the two materials 1:1 w/ 2% of the...

Duratec Sunshield Clear Topcoat in stock for same day shipping | Fibre Glast All of you guys always wanting a shiny, hard floor.... here is your stuff. I used the regular stuff..... it is recommended by many. I have no experience with the sunshield, but it popped up in my email, so I thought I...

I am going to purchase some duratec surfacing primer to use in my bilge and transom area. When you coat the area with gelcoat do you have to use their high gloss additive as well as a wax sanding additive or do you only use one or the other so that you canpolish the finish? thanks

hey i know this may be wrong area to post , but im ready to finish coat the floors in my boat. ive heard duratec hi gloss top coat is the thing. where do you buy it? i cant find it anywhere and is there anything else i need to get to use it? in my hydro about how much will be needed ? thanks

I'm looking for a #1040 Duratec Hi-Gloss Additive in a smaller container than the gallon size, I'm going to use a #180 clear gel coat and It is recommended to use this additive when top coating. I'm only buying the quart kit clear gel, I dont think I will need the gallon additive but that...