engines

SOLD Sanger, flat bottom twin 350 Chevy engines Sixteen Candles 1966 Sanger 19'4" flat bottom with freight train (tandem) with two 350" small block chevy's and a Velvet Drive trans. The engines are timed at 45* so it runs like a V-16. The rear engine is brand new. The trailer has new tires new...

#1 Blown injected on Alcohol - 496 BBC chevy tall deckblock half filled-4.250 valasco crank- oliver billet main caps-groden aluminum rods-ross pistons-total seal gapless rings-isky 802 lift cam-comp cam roller lifters and push rods- stainless steel comp rocker-crane stud girdles-merlin grumpy...

Donovan 500 wet block 4.500” bore Callies magnum 4.25” crankshaft Oliver 6.385 pro rods CP pistons 10.3-1 Clevite H series bearings Jesel belt drive systems ATI 7” balancer internal Comp cams mechanical roller EZ Max Iskey .903 lifters Manton push rods T&D shaft rockers Dart 355 Cnd heads 2.300”...

So a week ago I took the boat out but when I started it I could hear a loud metallic ticking sound from the engine...My buddy also heard it as >Metallic< and a guy at the marina....It made me think of the time I heard a very metallic noise 2 years after I bought the boat, then had my Father and...

(New Price) Seven Marine 557 Engines (2104) Package for Sale Seven Marine 557 HP outboard package for sale Two 2014 Seven Marine 557 HP outboard engines, excellent condition• ~380 hours 1 year of warranty remaining with option to obtain extended warranty • 30” shafts ZF...

Two fresh Pfaff Superstock engines from SS-36. Only the best parts used including Bryant Crank in one and Callies Crank in the other. Both engines have Manley rods, JE pistons, Dart Pro-1 heads, T-D steel shaft rockers, GM dual plane manifolds, mechanical roller Comp Cams, Billet timing chains...

Two fresh Pfaff Superstock engines from SS-36. Only the best parts used! Bryant Crank in one engine and a Callies Crank in the other. Both engines have Manley Rods, JE Pistons, Dart Pro-1 heads, T-D steel shaft rockers, GM dual plane manifold, mechanical roller cam with Comp Cams billet timing...

SOLD PENDING PAYMENT. 509” Big Block Chevrolet built by Pfaff Racing Engines. Roughly 35 hours run time after build. Engine was broken in on the Dyno and then tuned on the Dyno. Dyno sheet provided. Engine made 577.4 ft-lbs @ 4,400 RPM and 563.6 HP @ 5,693 RPM. Engine was built...

Looking for some advice on whats the best way to go to set up twin turbos on a LS engine, LS1 or2 or L98 probably. Will be stock engine, prepared to upgrade cam/springs, probably 10psi max, to go in marathon boat. I know it has been done before and was successful. I am not that up with the...

DRCE Oldsmobile Engines, 500 cu.in. 12.5 compression. 1050 hp. Dry Sump, Fuel Injected, I have 6 complete motors plus a ton of extra parts. All or part, call me and make me an offer. Roy... 805-450-3355

Just for grins, I was thinking, the other day......what the percentages are , of guys who build their own engines for their boat , guys who have hobbiest friend it, and guys that pay proffesional engine builders/shops , to bild their engine. Wondering still, having had said engine in boat...

I have this set of Nicson manifolds that I'm going to put up for sale in the spam section, but I don't know what they fit. Can you help me out with the ID? Also, since they seem to be old, rare.....as in not BBC, SBC, BBF..........and in great shape, what is a fair price? Port spacing is 4...

Guy busted his butt for the last two months on my new deal. The new motor is an animal. Picked up a full tenth of a second. Huge Thank you goes out to Mike for this motor! Consistent as could be, I didn't have my tuner at the track but I was able to do most of it myself, we ran a 5.99, 6.01...

PLEASE READ ENTIRE AD ASKING $5000 each I have TWO/2 Brand New 1979 LS7 crate engines FOR SALE. The block casting # 361959, they have 990 heads and date code 79. These engines are still in the factory crates. They have been stored inside, but they do need to be DISASSEMBLED, CLEANED and some...

Just out of curiosity, have any of the major manufacturers produced a rotary motor for outboard engines? I was talking with my pop on the way to Havasu about it and we couldn't figure out why not, since we had never seen one. Seems like a great combo.

We have running Jet boat BBCs and BBFs (take outs) complete from pan to intake starting at $750 call or PM for details

Some more ponies for 2014...:))THumbsUp

Has any of you Vegas folks, heard of John Keller and J&S machine shop, or John Keller racing engines? I visited their shop today, to look at a crank, and check out their shop to possibly do work on my block. They look like a respectable shop, just have never heard of them before.

Who were the Oldsmobile engine builders in the early 1960s????? I have a 1958 Oldsmobile engine. The block was built in 1957. It has 1962 heads and crankshaft. The crankshaft is stroked .500, with plates welded on #1/2 and #7/8 for balance. The pistons were 394 Oldsmobile bored .040. The...

2 super stock motors 427 spec motors ready to go if you are racing super stock class and are looking for a motor this is it one had aluminum heads shaft rockers roller cam the works other motor has cast heads roller rockers roller cam both really nice motors asking $5,500 for aluminum head motor...