Performance Boats Forum banner
filled
1-15 of 15 Results
  1. Parts for Sale
    Rex liquid filled temp gages $50 shipped $50 shipped
  2. Parts for Sale
    I have a fully filled Gen6 502 block with a fresh torque-plate honed 4.531 bore. The fill was done with torque plates installed, mains torqued, and before the final hone. Fully race detailed block, 9.780 deck, o-ringed with fresh (I believe .034) wire up .014". Mains are fresh honed, large spec...
  3. Jet Boats
    Does it matter where u have your exhaust? My first engine will not be a very big one, and I think it looks nicer when the 2 exhaust pipes "build in" the hull next to the jet drive like on the first pic... Main questions; If the exhaust pipes are lower like in the first pic, do they get...
  4. GN7 On the Dyno
    I picked up a 21' day cruiser last fall and ended up having to winterize before I could take it out for a spin. While winterizing, after pulling the exhaust manifolds and removing the drain plugs on the block, I discovered a hard solid material behind both plugs. My best guess is this is...
  5. Bob Teague
    I picked up a 21' day cruiser last fall and ended up having to winterize before I could take it out for a spin. While winterizing, after pulling the exhaust manifolds and removing the drain plugs on the block, I discovered a hard solid material behind both plugs. My best guess is this is...
  6. V-Drives
    I am getting tired of cleaning up the leaking grease on the wheels of my boat trailer. I have the standard bearing buddies, but I have heard that there are oil filled hubs available. I have not been able to find out where to get them. Does anyone have any experience with these oil filled hubs...
  7. Jet Boats
    Is anyone getting their bottles filled anywhere around here? It's not Parr or Smileys anymore. Guess I'm going back to blowers....
  8. Parts for Sale
    5" Gaffrig liquid filled speedo with stainless water pickup and transom bracket. Works great, but just stepped up to GPS $50 OBO plus ride
  9. Paint and Fiberglass Repair
    After alot of sleepless nights I've decided to pay a professional to fill all the holes in my Rogers. A good friend of mine lives in Havasu and is a customer of Scott Kornowski. So tomorrow morning I'm off to Havasu with the boat to get the all the holes filled. I had thru transom exhaust and...
  10. GN7 On the Dyno
    I have a 3/4 filled block in my jet boat, and it gets too hot to run wide open passes after a few miles of cruising. On a hot day, the engine gets hot enough to cause a miss at wide open after running for 10 min. Cooler days I have no problems. Oil temp is also really hight, but dont have an oil...
  11. Jet Boats
    Where in Riverside / Corona can I get my bottles filled? [1 1/2 lb. bottles.] No one in Blythe or Parker can fill 'em
  12. PB Open Water
    I was bedside with my son while he was recieving his stem cell transplant. After the proceedure was over and the hospital techs left, about an hour passed their was a knock at his hospital room door. It was Nicole Richie and Janet Jackson making the rounds visiting the kids. Two hours later...
  13. V-Drives
    Paging Tony or Davey B do you guys have any of your liquid filled guages left over??? I need some for a certain K that would be helpful as a friendly reminder of what not to do!:D
  14. GN7 On the Dyno
    I have a Merlin pro block filled to the bottom of the freeze plugs. Is it safe to run in a jet boat at the lake for extended times? Twin turbo set up so there will be some heat involved. Jerry
  15. PB Open Water
    Got a call from a family member, their district had a child with some vodka filled chocolate candy at school, and she got caught and suspended, her mommy is pissed.... What do you think??:confused:
1-15 of 15 Results
Top