Performance Boats Forum banner
filler
1-17 of 18 Results
  1. Paint and Fiberglass Repair
    I have these huge ugly fuel fills that I'd like to get rid of. Question is, how do I glass the area back in so that it don't look like ass after a couple trips to the lake. I've seen a bunch of dash repairs over the years that look like hell. I'd like to reglass and either install smaller...
  2. Jet Boats
    What do I use to fill screw holes, blend the loader for smoother water flow?
  3. Parts for Sale
    Im looking for fuel filler hole plugs. The tanks in my hull were moved. I need to plug the hole not in use. The boat came with two when l bought it, I have missed placed one. I have checked the regular venders, Cp, Harden, Rex with no luck. Of you know where the are sold, please share the...
  4. V-Drives
    I am starting an engine build for my '73 Diamond ski boat. I will be replacing it's 396 with a 427. I have a 289 casting 454 block at the machine shop right now that I would like to use for this build. That block is 4.280" bore right now, I would like to take it to 4.350". The block has some...
  5. PB Open Water
    I love my MCOB and I think the mid-cabin would be perfect for overnighting if I had some filler cushions. Does anyone know of anyone who makes filler cushions or have some tips on having them made/making them? I saw a great example of what I'd like this morning on this Eliminator V hull: 2001...
  6. GN7 On the Dyno
    I picked up a 21' day cruiser last fall and ended up having to winterize before I could take it out for a spin. While winterizing, after pulling the exhaust manifolds and removing the drain plugs on the block, I discovered a hard solid material behind both plugs. My best guess is this is...
  7. Bob Teague
    I picked up a 21' day cruiser last fall and ended up having to winterize before I could take it out for a spin. While winterizing, after pulling the exhaust manifolds and removing the drain plugs on the block, I discovered a hard solid material behind both plugs. My best guess is this is...
  8. V-Drives
    What are you guys using to fill the cracks between the plates/strut and the bottom of the boat. Last time we did the bottom (about 3 seasons ago) we just bondo'ed the small gaps between the plates/strut and the hull. Worked good on the bolts and OK on the plates but chunked off around the strut...
  9. Parts for Sale
    This is on a cackle car, 426 Hemi anyone has a lead on one let us know....... I am looking for a Milodon water filler neck with the mounting tab on the right like the picture attached to help complete a finish detail for my 71 T-Bar & Cortines cackle car. I have 2 of them for the other side...
  10. V-Drives
    I am 90% done with the bottom work on the Eliminator, now I need a filler coat over all the new glass to make everything super silky smooth before I re-speed coat/paint. What do you recommend? I've thought of or heard Bondo, glass resin + filler, and/or gelcoat.
  11. Parts for Sale
    116 cc chambers tit retainers solid roller spprings ss valves and pro t&d shaft rockers 2650.00 call Teddy at 304 549 0309
  12. Jet Boats
    Need some help. Trying to remove the deck mouted fuel filler cap so I can slide the tank back to remove the old steering cable and wiring harness on a '78 Sunkisst. It has side mounted tanks. I have drilled the rivets holding the fuel filler cap but can't get it to pull up. There is no way to...
  13. Paint and Fiberglass Repair
    Im gonna fly my rookie flag here and ask what kind, if any, filler can be used under gelcoat? I was thinking about a skim coat on my transom that I would block out to fill any slight imperfections prior to shooting the gel. Is it possible? I was thinling of some Rage Gold I have but am not...
  14. Parts for Sale
    Looking for two of the flip top fuel fillers ..... AND a prop puller... David
  15. Greg Shoemaker
    want to put saddle tanks back in hondo. The filler holes have been glassed in and painted over. How would I cut the holes back in without damaging paint, hull, ect. Thanks
  16. Paint and Fiberglass Repair
    I am doing some work on my dash. I replaced all the wood behind the fiberglass ,that went smooth, I have all the holes fillet in now time to finish and paint. I need to fill some low spots and some imperfections in the glass. Are all brands of filler the same, or are there some that are better...
  17. Paint and Fiberglass Repair
    I know that typical body filler (Bondo) absorbs water. I believe I read about a brand or type that does not absorb water, but forget the name. What is the brand? Thanks Doug
1-17 of 18 Results
Top