Performance Boats Forum banner

fitting

  1. fuel fitting broke!!

    Outboards
    I have a 1994 Johnson 175hp oceanrunner and i noticed while the motor would idle it was spitting out fuel outta the bottom fuel fitting so i went to take the fitting off thinking it had threads and when i went to un-screw it, it broke off can someone tell me that these lines are for and whats...
  2. NEW JBP Thru hull Fitting

    Parts for Sale
    New From Jet Boat Performance our Polished Hex Thru Hull , available in dash 8 or for use with slip on hose , Perfect for overboard dumps , Bilge dumps etc features "no caulking" O'ring seal and our exclusive hex head flange for simple quick installation , introductory price $15.95 (tax in...
  3. Bulkhead Fitting

    V-Drives
    I've called many fitting companies and I can't find the same bulkhead fitting that came out of my boat. I just bought one that was only 2 1/2 and the one I need is 3 1/4. Does anyone know where I can find one, I was hoping to keep them all aluminum if possible. The one on the right is the...
  4. Msd modules & 33 c thru hull fitting

    Parts for Sale
    Couple of parts not needed. New MSD modules odd numbers 6100 to 6900 $20.00 + shipping. & SS Thru hull fitting for 33c cable $25.00 + shipping.
  5. Looking for a AN Carb Fitting

    Jet Boats
    I've been looking for an AN fitting that threads right into the carb inlet and it has threads to attach a fuel pressure gauge. I want to be able to attach my existing 90* fuel line into that fitting. I know I've seen one around this site, but can't locate one in the catalogs..Looks like the...
  6. Looking for this fitting

    V-Drives
    Looking for this foot over ride fitting? would anyone be able to help me out with a online shop? Cheers :))THumbsUp
  7. Wtb -08 and -06 an fitting and lines

    Parts for Sale
    Looking for -08 fitting with lines to plumb my water lines for bassett headers.....also looking for -6 an w/ lines to run my saddle tanks to a 2in1 block....what you got??? Have parts to trade or cash...thanks
  8. ?????water pump not fitting??????

    V-Drives
    Im trying to install a magnaflow water pump on my bbc and the pto on the cam wont engage the pump, they are to far apart. Did i do something wrong? Cp performance said that i probably need to machine down the timing cover and that does not sound right at all. Im sure its something stupid. Any...
  9. WTB Thru hull fitting

    Parts for Sale
    for angled transoms. This is the fitting the cav plate rod goes thru. Rex part number is 221159. Last part needed for Chargin Charley. Thanks
  10. Do they make a hull fitting's better than

    Jet Boats
    this for a 43 series cable? lower right in the pic!
  11. Brass Water Injection Fitting

    Jet Boats
    Do they need any kind of sealer , or just screw them into the header and forget about it.. I bought all new ones so i only want to do this once:)grn
  12. So I pulled the Zerk fitting right out of...

    PB Open Water
    I put the grease gun on the Zerk fitting, greased it and pulled the gun off. The Zerk came off with it. Stripped the threads right out of the drive where it was previously attached. I had to put it in a vice grip to get it our of the gun. :)st:)st:)st:)st This brings me to two questions...
  13. WTB 90 AN bulkhead fitting (Black)

    Parts for Sale
    I need a Black90 A N fitting has to be the bulkhead fitting... I cant find one at Jegs or Summit or its a 2-3 week wait I need this to finish my fuel log install.. Do you have one or know where i can find one?? if so let me know.... Thank you....... size -8:D
  14. What's the secret? AN fitting Q

    GN7 On the Dyno
    I dunno, I don't really consider myself anal, but I'm not diggin how all of my fittings are sticking way out of everything on the npt side. I thought over on HB Superdave told someone he fixes that with a tap??? While were on the subject, how do I know if the braided stuff I'm running is fuel...
  15. File fitting rings today...?

    GN7 On the Dyno
    Question: I'm file fitting a set of Mahle rings today. There are 2 distinctly different colors of rings. I believe one is moly coated ductile iron and the other is cast iron. Which color is the top and which color is the bottom? Is the coated one the darker of the two?
  16. Longer Bulkhead Fitting

    Jet Boats
    I can't figure out where to post this up and get to the best group so I'll give it a shot here. I'm looking for an -8 bulkhead fitting that has a thread coverage area that is longer than the traditional 1" or 1 1/2". Now that I have you all confused, let me explain better. I'm attempting to...
  17. Longer Bulkhead Fitting

    GN7 On the Dyno
    I can't figure out where to post this up and get to the best group so I'll give it a shot here. I'm looking for an -8 bulkhead fitting that has a thread coverage area that is longer than the traditional 1" or 1 1/2". Now that I have you all confused, let me explain better. I'm attempting to...
  18. fitting website to screen

    PB Open Water
    how do i get this site to fit my screen? its to big
Top