float

WTB Holly float bowls complete. Would like 4500 series to be used for surge tank.

23' daycruiser with a jg pump and a place diverter, i was woundering about some input on a snoot for this boat, which would be better a staight snoot or a droop and why? any info would be helpful. also any idea on wedges if i end up with a staight, it has a 4* on it now. thanks

The annual Lazy Harry's float is this Saturday, Aug 24th.. The Bullhead City float was 2 weeks ago, but this float was the "original" float in this area.... I'll be out there in an old Tahiti assisting the floaters away from the shoreline and the weeds/branches that "pop" the floats, back into...

Here is what every boat owners man cave should have!! cool ice cream boat makes floats Professionaly built, extremely unique. This half boat was used at my boat shop to entertain customers and was a big hit. Now that I am retired and nolonger have my business, I am downsizing and have no...

ok so lets see how this goes. I know what a following Tom had. I myself only spoke with him on a few ocasions while having some work done. Very nice guy i must say. Talked to me like i was one of the guys. I ended up with one of his cool key chain floats. it has just sat on my desk for a few...

i finally got an actual handbook from game and fish and went through the check list. i have everything except a throw float. is there any better (cooler) looking ones besides the couch cushion? show me what you got, and where you got it from if you can remember, please

Just switched fuels (Dayco to Trick ) and noticed the blown jet was/seemed a bit "fat" on the exaust and the plug readings checked my fuel bowls and all four levels were up a bit from last use ? (:)eek(:)

I have a 850 DP. I recently put quick fuel quick change bowls on it. They have the built in sight window to adjust the floats. I took the boat out this weekend and could not get the secondary float adjusted properly. It was almost always completely full. I looked at idle and while cruising...

I just replaced my holley bowls on my 850 4150dp with quick fuel quick change bowls with fuel sight windows. I'm planning on starting the boat up today. Prior to installing them is there a rough position to set the needles to get the thing started? I'm not sure how high in the fuel the floats...

Here they are!

Anyone else joining the Lazy Harr'ys float on August 20th? We'll be there. :partyguy: http://www.lazyharrys.com/river_float.html

Ok, so here's my question. I know Demon has their problems, so this may just be a typical problem. But, here's the deal. The front float cooperates fine; the rear float level won't lower. It's at the VERY top of the sight glass, but the adjuster nut is all the way in. Ideas?

Just sank.... Guys and Gals, Float Fest will not be happening at Apache Lake this year. To be honest I have alot going on right now, that's all I have to say.. Just found out today that my buddy "The Band Promoter" pulled out of the deal we had and decided to throw his own Music Fest at Canyon...

hello My friend got 2 float carb for 250 $ holley 750 adj float carb 3310 are the carbs good ? can he tune it he will put it on the tunnel ram, i put two 650 douple pupmer on my tunnel ram the engines are the some and the tunnel ram also

so whos goin? i think we will be staying in havi that weekend but are definately headed down to parker for the float on saturday... anyone else going?:)devil

we were going to do it last year, but other things came up. this year we decided to go ahead and go out to parker for it. we will be staying at branson's and i think the float starts at patria flats down to the casino. anything i should know? any parts of the river closed to boats?

I don't remember seeing many float activated bilges in jets over the years but I did see one in action at the TP memorial. The float switches work great for hulls with deep bilges, but could I get away with a float on ye ole 19' Hawiian? With my shallow bilge, it seems like a lot of water would...

Well guys we have only missed a few trips over the past 2 years but I can see light at the end of the tunnel. My goal for not being out of commission a full years is not out of reach. I plan to have the boat tested and ready for St. Patties day. The boat is in tow and will be at Smooth as Glass...

1) What do you guys do for the bowl vents when using a non-marine carb? Can you buy the hooked vents or do you just run a hose between the two vent and punch a few holes over the venturis? 2) I think I have a sinking float in the primary side, if I do, which type of float material would you...

I have never done it..nor have I seen any pics. Can someone please enlighten me. Possibly going to go this weekend. Do they allow boats on the water during the float..or do they close the river down? What are the pros and cons of this shindig..any tips? Deano...