Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 66 Results
  1. Parts for Sale
    SOLD Excellent condition vintage comes with all or most linkage for functional butterflies set up for single dominator carb $150 plus shipping pm for more pics if needed
  2. GN7 On the Dyno
    Anyone know if the Mark 4 head gasket is any different then the Mark 5 or 6 head gasket? Take a look at the pics cyl. #4 piston melted. look at the gasket the engine builder used on it and how it is blocking the water cooling hole and how the other pics show they are unblocked. This is a mark 4...
  3. Jet Boats
    Replacing bowl gasket. 10 years since it was replaced when the pump was rebuilt and over 200 runs. Getting ready for upcoming KDBA race. Silicone or not? I`ve thought about applying a thin coat of silicone on both sides of the gasket, letting it cure and then install?? Are there any recommended...
  4. GN7 On the Dyno
    I found p/n from Flat Out Gaskets #FOG 1249 but it cant ship till after June 6 , are they the only co. that make this gasket ????
  5. Jet Boats
    Need a part # timing cover gasket for BBC w/.400 raised cam ?....................edit , I just found a p/n from Flat Out gaskets #FOG 1249 , but ship date is like June 6.........are they the only ones making these gaskets ????
  6. GN7 On the Dyno
    I am doing a head change from peanuts to large oval, on a standard bore, standard deck 454, flat top, piston, .018-.020 in the hole. I already have a set of head gaskets, Fel-pro 1017-1, composite, steel core. Is this gasket ok to use, or should I be using some thing else, like the 1037? my main...
  7. GN7 On the Dyno
    First timer installing a supercharger. Install gasket dry, oiled, glued to one side? Thanks
  8. GN7 On the Dyno
    I need to hear from the experts here. I'm assembling my blown BBC. I'm running Dart Pro 1 heads. When I ordered my head gaskets(cosmetic 4.310 bore, .040 thick), I chose the set made for Brodix heads by mistake. I didn't scroll all the way through the notes on the page. I know, I'm a idiot...
  9. Parts for Sale
    Looking for 2x4 carb scoop old school injector type thanks
  10. GN7 On the Dyno
    These are issued with instructions "do not use any type of glue or sealer..............." Seems I have read and heard to go ahead and use Indian Head or Permatex is a safer bet. I can't see/feel any sealer they state is already on the gaskets. This is going on 454 '60 over, 8:1, never over...
  11. GN7 On the Dyno
    I have a BBC GEN 5/ 502 Block bored to 4.56" making 522 CID with Brodix BB2 heads. Has a head gasket leaking oil between head & block at cyl. # 7. It as a Monneyham 1071 blower running on gasoline. It now has SCE Titan #S13575 copper head gaskets. I have re-used these gaskets once already so...
  12. Jet Boats
    is there a difference in the 455 exhaust gaskets that have the divider between the two center ports and ones that do not? I just went to the local auto store to order a set of Felpro gaskets and the picture they showed me had nothing between those two ports. Anything I should know here??
  13. GN7 On the Dyno
    Has anyone reused MLS head gaskets, with success? :hmmm:
  14. V-Drives
    Is there supposed to be a gasket between the head and Nicson wet log exhaust manifold? There is only 5 bolts between the head and exhaust manifold? Is this right?
  15. GN7 On the Dyno
    Looking for a head gasket for my 454 .040 over bore 462.5..Looking for a fel pro part number that will work...I want 462.5 bore and .039 thickness..anybody get a part number for me thanks..
  16. GN7 On the Dyno
    Got some new to me breathers. Whats the best way to keep from leaking? Use a gasket(what type) or just use some Right-Stuff and bolt down? Or Both? Thanks for any help. Johnf
  17. GN7 On the Dyno
    Does any manufacturer have a .021 steel gasket that will fit a 4.031 bore? What is the best sealer for steel?
  18. GN7 On the Dyno
    540CI, 8.0:1 compression, max 8-9psi of boost, 850-900hp pump gas hyd roller 6000rpm max. Engines are in a heavy twin engine 38 Cigarette. We removed heads last night, as the valve leakage was excessive. Heads are in shop for rebuild. Head gaskets were showing signs of possibly a little leakage...
  19. GN7 On the Dyno
    Education needed on copper head gaskets. I have a 468 Bullit roller motor in a Mantra Performer. Eagle crank/rods. J/E pistons. Dart Pro 1 aluminum heads. Being a lake boat will be its only purpose. This is my first engine to own with copper head gaskets. Don`t know much of its history except...
  20. GN7 On the Dyno
    First timer here. Before I ruin my new manifold. If I remove the material were marked will this be ok? Also do you trim off gasket that will be in the valley? ( If it's the right gasket going the right way?) Trying a rebuild and want to get all the grinding done. Thanks for any help. Johnf:)Unsure
1-20 of 66 Results