Performance Boats Forum banner

gaskets

  1. [Question] Olds header gaskets

    Jet Boats
    What are the Olds engines using for Hardin aluminum header gaskets?
  2. SBC MLS Head Gaskets New $110

    Parts for Sale
    Two new never opened. Felpro $110 free shipping from New Port Richey, FL 918 two six nine 8094
  3. how many case gaskets for rebuilding a split case casale?? differing views.

    V-Drives
    Hi all I am rebuilding the split case v drive casale finally, managed to get all the bits from beaver fab. Now, exactly how many case gaskets need to go back into the rebuild? I have a 3/8" plate, and I understand that you need a thick gasket on one side and a thick and thin on the other...
  4. Casales V-Drive Gaskets

    V-Drives
    When ever I get a set of Casales V-Drive gaskets, it comes with 2 thin case gaskets, and one thick one. Does anyone know how thick the thin ones are and how thick the thick one is?
  5. Best head gaskets for jet boats? MLS or Graphite?

    GN7 On the Dyno
    ​​My Vortec 350 has slipping compression and has sprung a couple drippy coolant leaks around the head gaskets of the rear cylinders. Three years ago when the engine was fresh the compression was about 200 PSI per cylinder. Now it is 180-200 with one at only 150 PSI. I've had two previous engines...
  6. Casale gaskets in Havasu?

    V-Drives
    Is there any shops in Havasu that sell Caslae v-drive gaskets? I need midplate gaskets as well as bering cap gaskets? Thanks for the help. Lock 702-373-0100
  7. [Question] Spray Head gaskets with Hitack?

    GN7 On the Dyno
    I'm installing Felpro MLS head gaskets on my BBC with Brodix aluminum heads. Should I spray them with Hitack or copper Kote or just install them dry?
  8. Recommended Intake Gaskets

    Jet Boats
    for a Ford 460. It developed a pretty consistent external leak at the front water jacket. Tightened as much as possible but wouldn't go away. Just wondering what's best to replace them with. Or will any old Fel-Pros, Edelbrocks, Mr Gasket do from my local speed shop? Some details: Not a hot...
  9. Valve Cover Gaskets

    Jet Boats
    Hey Guys, Can I get a recommendation on some valve cover gaskets? Cork, rubber, steel core what do you guys prefer?
  10. Cometic gaskets

    GN7 On the Dyno
    468 BBC, 13-1 comp, N/A, maybe Nos, but down the road. Cometic says install dry unless blown or Nos. If I do Nos again it will not be for quite a while. Question is; should I copper coat or not? Thanks in advance
  11. Head Gaskets?

    GN7 On the Dyno
    I'm working with a 454 block dated around 1974, so I think that is MKIV? I have square port closed chambered iron GM heads. 11:1 TRW pistons...... I went into a local speed shop the other day to buy some Felpro head gaskets, intake gaskets, exhaust gaskets, and head bolts. I was going to go with...
  12. Bbc rect port intake gaskets

    GN7 On the Dyno
    Having trouble finding gaskets with that are punched for the upper bolts above the intake runners. 2 each side and located directly between the runners. Anyone have a part number ? Hope I explained that ok!!!!
  13. bbf cometic head gaskets

    Parts for Sale
    one pair cometic mls head gaskets pn caggc5667-040 bbf 429-460 4.5 bore .040 thick, taken out of packages and put back in and sealed , new never used 100.00 plus ride, pm for info
  14. Ford FE Manifolds, Headers, risers, pump gaskets

    Parts for Sale
    Coated Bassett headers for Ford FE (352-428) come with stainless waterlines and Bassett "T" valve(has ball but NO spring). $400 Also have two sets of Edelbrock Aluminum log style manifolds for Ford FE. One set has three studs, other has 4 studs one set has be welded. $150 and $100 for the ones...
  15. exhaust gaskets ford

    V-Drives
    My friend has a 460 ford with exhaust log manifolds they say china on them they won't stay tight and blow exhaust gaskets is there a better gasket I've seen aluminum ones or should he get new logs these exhaust manifolds have the snails built in its a nice looking manifold but instead of holes...
  16. Dart Big M Block Head Gaskets

    GN7 On the Dyno
    Can anybody tell me which is the right head gasket for a dart big m block 4.5 bore with afr heads, dart said felpro 1047 and afr said felpro 1017 thanks john
  17. MLS Head gaskets

    GN7 On the Dyno
    Fel-Pro 1075, .041 compressed thickness. If a MLS gasket is supposed to be a specified thickness when installed (compressed), can someone please explain why these gaskets (30 hrs run time), are measuring less then that after removal. The most likely spot for a leak, is less then the...
  18. Head Gaskets for Gen V with Brodix Heads

    GN7 On the Dyno
    I want to use MLS head gaskets but want to make sure I use the right ones. Any help?
  19. BBC Cometic Gaskets

    GN7 On the Dyno
    Can the Cometic BBC MLS gaskets be reused??
  20. Felpro 1211 intake gaskets

    Parts for Sale
    I have 3 new pair 1211 intake gaskets for factory BB Chev rect. port heads with the extra center bolt between the ports. Gaskets only, no end seals. These will not work on aftermarket heads without the extra bolt holes. These are 1/16 thick print-o-seal gaskets. $15.00/pr plus the ride. PM or...
Top