Search Results for ‘gimbal’

Volvo SX ujoint, shaft, bellows, seals that go in the housing that comes apart when changing the shaft, and the seal that goes behind the gimbal. All new genuine VP. $400 for all of it plus the ride. I know it's not the usual performance stuff but I know some have other boats that are more...

Looking for the Imco gimbal with hydraulic rams on it already. Preferably silver but color isn't a deal breaker. I'm pretty sure the gimbals without steering can have the parts added to them as well so that may be an option. Let me know what you have. Thanks

I think that's what it is. 400$ Obo plus ride.

Hello all, I have. Bit of play in my steering. About 2.5-3" of play in outdrive. After diagnosing, I believe that my play is in the tiller arm, not the gimbal ring. When inspecting, no movement was noted between the pin and gimbal ring. I think that all of the play is between the pin and...

Parted out a 21 schiada that was bring converted to a O/B and don't need the drive. Everything looks to be in good shape. The previous owner stated it was a newer upper and rebuilt lower. He advised that Tim at Dirty Deeds in parker did the rebuild (I do have a picture showing the work being...

Boat new to me. As i trim the outdrive up and down it looks like is rubbing on the gimbal ring only on the starboard side and is removing the paint off the drive. Thanks in advance:bangmyhead:

This gimbal came of a 21" boat with a stock BBC … comes with everything in the picture … gimbal is tight … everything in the picture 1,500. [email protected]

Looking to buy Brovo 1 1.5 outdrive and complete transom gimbal housing assembly 714.728.7563

Imco heavy duty integrated transom assembly with Hydraulic steering. The unit is new It was installed by a boat builder company that folded. The company could not pay for it so it was repoed by Imco. This unit was never ran it has superficial marks and some scratches from handling installation...

330 hp Outdrive, transmission, Gimbal, pump and Exhaust $2000 Call 928-680-5974 Ask for Jim Located in Lake Havasu, AZ

Bought a 1981 Welcraft(says Scarab on the side, but I think it is a Nova). Any guesses on what this rubber spacer is on my drives? Surely it can't be right.

These are the new X Power Drive Stainless Gimbal Rings. They are a direct replacement for the HP bravo gimbal, and over 300% stronger than stock and they have a warranty for life. That's something you don't hear in the boating world very often..

I have about 1/4 inch up and down on my Bravo 1 drives at the skag, meaning I lift up on the skag and get about a 1/4 inch movement on the port side. Starboard side, very little movement but a slight klunk sound. Is a 1/4 inch too much? If not what is acceptable? None?

looking for a good used imco gimbal.

I am having a new deck boat built with a Teague 800 motor and Teague drive. I ordered an IMCO HD transom assembly with the ITS set up. The dealer put a Mercury Racing HP gimbal on instead without ITS and that will hook with my Teague platinum drive. They said it was miscommunication but the...