Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 72 Results
  1. Boat Parts Classifieds
    Selling an fittings and SS hose all different sizes - 4 - 8 -10 - 12 - 16 - 20 if any interest contact me for sizes and amount. NPT - AN and AN hose fittings also SS hose. Also 2 SS through hull cable fittings.
  2. Boat Parts Classifieds
    I Have 4ft of MPI 110-1000, INTAKE 1" hose Premium marine hose New never been installed, I bought it by mistake, I needed 3/4" $15.00 + ride Call 530 575-5025
  3. Boat Parts Classifieds
    The build is finished so I ordered way to much braid hose,40 feet will do a complete boat, 170 and shipping is on you will combined boxes for cheaper shipping. Adam6192479921
  4. Jet Boats
    Just bought a 75 Southwind 20ft boat with a 460 and 12J/c pump. The previous owner was nor the sharpest knife in the drawer, based on a few of the issues with boat, but it was purchased dirt cheap as a project and things are expected. Doing a bit work on the pump right now, mainly sealing all...
  5. Boat Parts Classifieds
    Have 2 SETS NIB BBC valve covers with hardware and NIB Vibrant total of 40 feet -8 Black Nylon Braid hose high resistance fuel ,oil Selling all will not separate 375.00 shipping is on you located in El Cajon 92019
  6. V-Drives
    Need help on exhaust hose. I bought hose without wire for flexibility but I'm getting a kink. The exhaust is not lined up directly behind the exhaust logs. Should I use wire hose??? I need some thing that is flexible. Very frustrating. Thanks.
  7. Jet Boats
    Want to fire off the motor in the driveway for a maybe 5 minutes and check for fuel pressure/leaks. I have never really ran it on the hose and I don't know if you should turn the water on first and let it start to fill the block and then fire the motor or fire the motor first and then let the...
  8. Boat Parts Classifieds
    I have 4 brand new hose reels never open $250 + shipping , 2/1'' 50' air hose and reel. cost over $500 from Granger
  9. Jet Boats
    any one have there hose fittings / hose ends re-anodized in the San Fernando valley? I am redoing all the hoses and want to have all fittings done in all red. I added up to buy new ones would be over $1200. trying to save a few bucks and make them look new again? thanks for any info, Bob
  10. Boat Parts Classifieds
    Trumpet/Bell style exhaust tip for 3.5" hose In pretty good condition. One of the studs needs to be replaced or can be used with out. The hose size is 3.5, not 2-7/8. I have the rubber flappers that can go over them. Make me an offer. Asking $50 for both obo. 714-222-9253 Robbie
  11. Jet Boats
    Is it normal for water to only come out of one side when hooked to the hose? I disconnected the hoses and they seem to be flowing water, checked the elbow in the snail, no problem there. I did feel a lot of calcium when I stuck my finger in the snail. Is this normal? Any input is appreciated
  12. Boat Parts Classifieds
    As pictured -12 Hoses, 2- straights, 1-45 degree, 1-30 degree with caps and plugs...$60 to your door in the 48 Thanks for looking Dan 661 510-6362
  13. Boat Parts Classifieds
    Used in excellent condition 4pcs -6 straight fittings 5pcs -6 90 degree fittings 10 ft -6 braided hose $85 includes shipping to anywhere in the 48
  14. Boat Parts Classifieds
    New AN-6, AN-8 and AN-10 hose ends. They have a female fitting on one end and a hose fitting on the other end for steel braid or similar line for fuel, water or oil. They range from straight hose ends up to 180* hose ends in some sizes. You can buy any quantity. Priority Mail shipping starts at...
  15. Boat Parts Classifieds
    Several AN-8 stuff for sale. Prices & quantities vary. (949)248-0083 or mvmracing@cox.net Straight hose ends (8)...........$7.00 ea. 30* hose ends (2).................$17.00 ea. 45* hose ends (12)................$17.00 ea. 60* hose ends (6)..................$17.00 ea. 90* hose ends...
  16. Boat Parts Classifieds
    Steel braid hose & fittings. Length in inches is from the end of one fitting to the end of the other. First number is length in inches and the second is the fitting combination. AN -10 23 .............ST/45 (2) 20 .............ST/45 19 .............ST/45 19 .............ST on one end only 18...
  17. Boat Parts Classifieds
    I have 41 pieces of steel braid hose with AN-8 fittings on both ends and 4 pieces with a fitting only on one end. I'm not charging for the hose, AN-8 straight fittings are $10 each and any fitting other than straight is $12 each. The first number is the length from end of fitting to end of...
  18. Boat Parts Classifieds
    I have several pieces of braided steel line with AN fittings on both ends. Fittings are Earl's, Russell and XRP. I am not charging anything for the hose, but I am charging $10 each for straight fittings and $12 each for anything other than straight. I have 17 x -8, 6 x -10 and 5 x -12. The first...
  19. Boat Parts Classifieds
    A bunch of steel braid hose remnants left over from a job. If you can use this stuff; you can save some money. $40 for all of it. (949)248-0083 or mvmracing@cox.net
  20. V-Drives
    I have some 3 1/2 inch corrugated exhaust hose , it has the steal wire in it, I just found some that is soft walled but looks the same on cp performance, I'm just wondering what type you guys run? I need to buy some and not sure if I need the corrugated or not ?, I had enough of the stuff to do...
1-20 of 72 Results
Top